9行目: |
9行目: |
| === 基本 === | | === 基本 === |
| ポートを使用する種別を定義して、ポートを使いやすいように割り当てます。 | | ポートを使用する種別を定義して、ポートを使いやすいように割り当てます。 |
| + | |
| + | === ポート番号を調べる方法は ? === |
| + | 構成図を実機入荷前に書く場合、ポート番号の表記をドキュメントから調査したい状況があります。 |
| + | |
| + | 例えば Catalyst 9500 の場合、ハードウェア インストレーション ガイドと、コンフィギュレーションガイドのインターフェース設定を確認しましょう。 |
| + | |
| + | * 日本語 : |
| + | ** [https://www.cisco.com/c/ja_jp/td/docs/switches/lan/catalyst9500/hardware/install/b_catalyst_9500_hig/b_catalyst_9500_hig_chapter_01001.html#concept_qr4_53l_ldb Cisco Catalyst 9500 シリーズ スイッチのポートマッピング] |
| + | ** C9500 は日本語ドキュメントなし |
| + | |
| + | * 英語 : |
| + | ** [https://www.cisco.com/c/en/us/td/docs/switches/lan/catalyst9500/hardware/install/b_catalyst_9500_hig/9500_product-overview.html#concept_qr4_53l_ldb Port Mapping for Cisco Catalyst 9500 Series Switches] |
| + | ** [https://www.cisco.com/c/en/us/td/docs/switches/lan/catalyst9500/software/release/16-10/configuration_guide/int_hw/b_1610_int_and_hw_9500_cg/configuring_interface_characteristics.html#concept_y44_5bz_tfb Configuring Breakout Interfaces] |
| + | |
| + | === 使用されるポート名 === |
| + | |
| + | ==== Catayst 9200 / 9300 / 9500 / 9500X ボックス型スイッチ ==== |
| + | 以下のポート名ルールが使用されます。 |
| + | |
| + | '''<タイプ><スイッチ番号(X)>/<モジュール番号(Y)>/ポート番号(Z)/波長番号(ブレイクアウト時のみ追加)''' <ref>[https://www.cisco.com/c/en/us/td/docs/switches/lan/catalyst9500/software/release/17-12/configuration_guide/int_hw/b_1712_int_and_hw_9500_cg/configuring_interface_characteristics.html#interface_configuration_mode Interface Configuration Mode] |
| + | |
| + | To configure a physical interface (port), specify the interface type, module number, and device port number, and enter interface configuration mode. |
| + | |
| + | * Type: FortyGigabitEthernet (fortygigabitethernet or fo) fiber ports. |
| + | |
| + | * Switch number: The number that identifies the given device. The number range is assigned the first time the device initializes. |
| + | |
| + | * Module number: The module or slot number on the device: switch (downlink) ports are 0, and uplink ports are 1. |
| + | |
| + | Note |
| + | ----C9500-32C, C9500-32QC, C9500-48Y4C, and C9500-24Y4C models of the Cisco Catalyst 9500 Series Switches have their Module number as 0 always. |
| + | ----* Port number: The interface number on the device. The 10/100/1000 port numbers always begin at 1, starting with the far left port when facing the front of the device, for example, FortyGigabitEthernet1/0/1 or FortyGigabitEthernet1/0/8. |
| + | |
| + | On a device with SFP uplink ports, the module number is 1 and the port numbers restart. For example, if the device has 24 10/100/1000 ports, the SFP module ports are GigabitEthernet1/1/1 through GigabitEthernet1/1/4 or TenGigabitEthernet1/1/1 through TenGigabitEthernet1/1/4. |
| + | |
| + | |
| + | [https://www.cisco.com/c/en/us/td/docs/switches/lan/catalyst9500/software/release/17-12/configuration_guide/int_hw/b_1712_int_and_hw_9500_cg/configuring_interface_characteristics.html#configuring_a_breakout_interface Configuring a Breakout Interface]</ref> |
| + | |
| + | ==== 例 ==== |
| + | |
| + | * GigabitEthernetX/Y/Z |
| + | * TenGigabitEthernetX/Y/Z |
| + | * TwentyFiveGigabitEthernetX/Y/Z |
| + | * FortyGigabitEthernetX/Y/Z |
| + | * HundredGigabitEthernetX/Y/Z |
| + | * FourHundredGigEX/Y/Z |
| + | |
| + | モジュール番号は、0 だとオンボード ポート、1 はアップリンク ポート / モジュールを意味します。 |
| + | |
| + | ==== Catalyst 9400 / 9600 シャーシ型スイッチ ==== |
| + | 以下のポート名ルールが使用されます。 |
| + | |
| + | '''スタンドアローン : <タイプ><スロット番号(X)>/0(Y)/ポート番号(Z)/波長番号(ブレイクアウト時のみ追加)''' <ref name=":0">[https://www.cisco.com/c/en/us/td/docs/switches/lan/catalyst9600/software/release/17-2/configuration_guide/int_hw/b_172_int_and_hw_9600_cg/configuring_interface_characteristics.html#concept_dnb_f3w_tfb Breakout Interfaces] |
| + | |
| + | HundredGigabitEthernet <var>slot-num</var> /0/<var>port-num</var> /[1-4]: For a device without Cisco StackWise Virtual (standalone device). |
| + | |
| + | HundredGigabitEthernet <var>switch-num</var> /<var>slot-num</var> /0/<var>port-num</var> /[1-4]: For a device with Cisco StackWise Virtual.</ref> |
| + | |
| + | '''StackWise Virtual : <タイプ><スイッチ番号(X)>/<スロット番号(Y)>/ポート番号(Z)/波長番号(ブレイクアウト時のみ追加) <ref name=":0" />''' |
| + | |
| + | ==== 例 ==== |
| + | |
| + | * GigabitEthernetX/Y/Z |
| + | * TenGigabitEthernetX/Y/Z |
| + | * TwentyFiveGigabitEthernetX/Y/Z |
| + | * FortyGigabitEthernetX/Y/Z |
| + | * HundredGigabitEthernetX/Y/Z |
| + | * FourHundredGigEX/Y/Z |
| + | |
| + | シャーシ型の場合、スタンドアローン構成と StackWise Virtual 構成で、頭の数字の意味が異なる点に注意です。 |
| + | |
| + | ===== Catalyst 9600 でブレイクアウトした場合のポート名例 ===== |
| + | [https://www.cisco.com/c/en/us/td/docs/switches/lan/catalyst9600/software/release/17-2/configuration_guide/int_hw/b_172_int_and_hw_9600_cg/configuring_interface_characteristics.html#reference_uwp_3dz_tfb Example: Configuring a Breakout Interface]<syntaxhighlight lang="diff"> |
| + | Example: Configuring a Breakout Interface |
| + | The following example shows a sample output of the show interface status command for a specified interface: |
| + | |
| + | Device# show interface status | include 1/0/25 |
| + | |
| + | Hu1/0/25 inactive 1 full 40G unknown |
| + | Hu1/0/25/1 connected 101 full 10G QSFP 4X10G AC10M SFP |
| + | Hu1/0/25/2 connected 102 full 10G QSFP 4X10G AC10M SFP |
| + | Hu1/0/25/3 connected 103 full 10G QSFP 4X10G AC10M SFP |
| + | Hu1/0/25/4 connected 104 full 10G QSFP 4X10G AC10M SFP |
| + | </syntaxhighlight> |
| | | |
| === ポート種別 === | | === ポート種別 === |
222行目: |
306行目: |
| 主に PoE スイッチとして電力が必要な環境で利用します。 | | 主に PoE スイッチとして電力が必要な環境で利用します。 |
| | | |
− | == 用語 ==
| + | = 用語 = |
| | | |
| === コネクタ === | | === コネクタ === |
236行目: |
320行目: |
| MTP : Multi-fiber Termination Push-on | | MTP : Multi-fiber Termination Push-on |
| | | |
− | == 参考リンク ==
| + | = 参考リンク = |
| [https://www.cisco.com/c/dam/global/ja_jp/products/collateral/switches/catalyst-9000/catalyst-9000-design-guide-basic.pdf Cisco Catalyst 9000 シリーズ スイッチ 実践ガイド(基本機能編)] | | [https://www.cisco.com/c/dam/global/ja_jp/products/collateral/switches/catalyst-9000/catalyst-9000-design-guide-basic.pdf Cisco Catalyst 9000 シリーズ スイッチ 実践ガイド(基本機能編)] |
| | | |
| [https://ja.fibresplitter.com/news/modular-patch-panel-and-breakout-cabling-whic-24296708.html モジュラーパッチパネルとブレイクアウトケーブル:将来性のあるネットワークにどちらを選択しますか?] | | [https://ja.fibresplitter.com/news/modular-patch-panel-and-breakout-cabling-whic-24296708.html モジュラーパッチパネルとブレイクアウトケーブル:将来性のあるネットワークにどちらを選択しますか?] |
| + | |
| + | [https://www.cisco.com/c/en/us/td/docs/switches/lan/catalyst9500/software/release/17-12/configuration_guide/int_hw/b_1712_int_and_hw_9500_cg/configuring_interface_characteristics.html#breakout_interfaces Breakout Interfaces] |
| + | |
| + | [https://www.cisco.com/c/ja_jp/td/docs/switches/lan/catalyst9500/hardware/install/b_catalyst_9500_hig/b_catalyst_9500_hig_chapter_01001.html#id_69801 Cisco Catalyst 9500 シリーズ高性能スイッチのポートマッピング] |
| + | |
| + | = 引用 = |
| [[カテゴリ:Catalyst 9000]] | | [[カテゴリ:Catalyst 9000]] |
| [[カテゴリ:Catalyst]] | | [[カテゴリ:Catalyst]] |