差分

ナビゲーションに移動 検索に移動

2024-04-03 Cisco StackWise Virtual まとめ (ソースを閲覧)

2024年4月3日 (水) 11:39時点における版

13,206 バイト追加 、 2024年4月3日 (水)
細
Hkatou がページ「2024-01-24 Cisco StackWise Virtual まとめ」を「2024-04-03 Cisco StackWise Virtual まとめ」に移動しました
5行目: 5行目:  
=== 初期リリースの制限 ===
 
=== 初期リリースの制限 ===
 
*すべてのプラットフォームで、初期リリースの IOS-XE では StackWise Virtual がサポートされません
 
*すべてのプラットフォームで、初期リリースの IOS-XE では StackWise Virtual がサポートされません
−
*例) C9400X-SUP-2 は、17.7.1 から使用できますが、17.12.x でも未だに SWV が動作しません
+
*例) C9400X-SUP-2 は、17.7.1 から使用できますが、17.9.1 以降でサポートされます
 +
*コマンドは入るが動作しない / 保証されない、といったバージョンもある
    
=== 機能追加 ===
 
=== 機能追加 ===
 
*C9500 のアップリンク モジュールで、SVL が使用できないリリースがありました
 
*C9500 のアップリンク モジュールで、SVL が使用できないリリースがありました
 +
*新リリースではサポートされます (サポート マトリックス参照)
   −
=== SVL は 8 ポートまで ===
+
=== SVL は 8 ポートまで <ref>[https://www.cisco.com/c/en/us/td/docs/switches/lan/catalyst9500/software/release/17-9/configuration_guide/ha/b_179_ha_9500_cg/configuring_cisco_stackwise_virtual.html#id_85771 Cisco StackWise Virtual on Cisco Catalyst 9500 Series Switches]
 +
 
 +
You can configure '''up to 8 SVLs''' in a Cisco StackWise Virtual solution using Cisco Catalyst 9500 Series Switches or Cisco Catalyst 9500 Series High Performance Switches.</ref> ===
 +
 
 +
* UADP ASIC 搭載機の SVL 増速 / DAD 設定は再起動が必要なため、初期導入時に SVL を最大の 8 ポート + DAD 1 ポートまで接続してしまうのがおすすめ
 +
** アップリンク本数増加が将来的に必要なければ、SVL 本数は少なくて良いです
 +
* Silicon One ASIC 搭載機 (C9500X , C9600X) は再起動が必要なくなりました
    
=== SVL を設定できるポートには制限があります ===
 
=== SVL を設定できるポートには制限があります ===
29行目: 37行目:     
=== SVL の速度は同一である必要があります ===
 
=== SVL の速度は同一である必要があります ===
−
*10G / 25G 両対応ポートでは、トランシーバを搭載することでモードが確定するため、25G の場合は搭載しないと設定ができません
+
*10G / 25G 両対応ポートでは、トランシーバを搭載することでモードが確定するため、25G の場合は'''搭載しないと'''設定ができません
 +
 
 +
=== C9500-24Y4C , 48Y4C で 25G ポートを SVL に使用できます <ref>[https://www.cisco.com/c/en/us/td/docs/switches/lan/catalyst9500/software/release/17-9/configuration_guide/ha/b_179_ha_9500_cg/configuring_cisco_stackwise_virtual.html#id_85771 Cisco StackWise Virtual on Cisco Catalyst 9500 Series Switches]
   −
=== C9500-24Y4C , 48Y4C で 25G ポートを SVL に使用できます ===
+
You can '''establish SVLs using''' 40G or 10G Ethernet connections on Cisco Catalyst 9500 Series Switches and 100G, 40G, '''25G''' and 10G Ethernet connections on Cisco Catalyst 9500 Series High Performance Switches.</ref> ===
 
*100G ポートを温存したい場合に有効
 
*100G ポートを温存したい場合に有効
   −
*増速などの設定変更時、再起動が必要です
+
=== Network Advantage ライセンスが必要です <ref>[https://www.cisco.com/c/en/us/td/docs/switches/lan/catalyst9500/software/release/17-9/configuration_guide/ha/b_179_ha_9500_cg/configuring_cisco_stackwise_virtual.html#reference_kph_hgh_nlb Restrictions for Cisco StackWise Virtual]
−
**C9500X , C9600X など Silicon One 系では再起動が必要なくなりました
     −
=== Network Advantage ライセンスが必要です ===
+
Cisco StackWise Virtual configuration commands will be recognised '''only on a switch running Network Advantage license'''. The configuration commands will not be recognised on a Network Essentials license.</ref> ===
 +
*WS-C4500X は IP Base でも VSS が組めていましたが、C9500 は Network Advantage (IP Services 相当) になります
 +
**リプレース時の金額が異なるため注意
 +
**例) Catalyst 4500X VSS IP Base -> Catalyst 9500 SWV Network Advantage
 +
*Layer2 スイッチで StackWise Virtual を入れるのは、ライセンス費用が高くつきます
 +
**C9300X Stack などが使用できないか検討したほうが良いでしょう
 
*C9404R + SUP1 では、さらに C9400-SUP-UPG-LIC= ライセンスが必要 <ref>[https://www.cisco.com/c/en/us/td/docs/switches/lan/catalyst9400/software/release/16-9/release_notes/ol-16-9-9400.html#concept_gby_2p1_j2b Software Features in Cisco IOS XE Fuji 16.9.1] Supervisor Modules Cisco Catalyst 9400 Series Supervisor 1 Module (C9400-SUP-1). The feature requires a special, additional, C9400-SUP-UPG-LIC= license with this supervisor module.</ref>
 
*C9404R + SUP1 では、さらに C9400-SUP-UPG-LIC= ライセンスが必要 <ref>[https://www.cisco.com/c/en/us/td/docs/switches/lan/catalyst9400/software/release/16-9/release_notes/ol-16-9-9400.html#concept_gby_2p1_j2b Software Features in Cisco IOS XE Fuji 16.9.1] Supervisor Modules Cisco Catalyst 9400 Series Supervisor 1 Module (C9400-SUP-1). The feature requires a special, additional, C9400-SUP-UPG-LIC= license with this supervisor module.</ref>
−
===Vlan ID===
+
===Vlan ID <ref>[https://www.cisco.com/c/en/us/td/docs/switches/lan/catalyst9500/software/release/17-9/configuration_guide/ha/b_179_ha_9500_cg/configuring_cisco_stackwise_virtual.html#reference_kph_hgh_nlb Restrictions for Cisco StackWise Virtual]
−
*4094 は使用できません
+
 
 +
When deploying Cisco StackWise Virtual, ensure that '''VLAN ID 4094 is not used anywhere on the network.''' All inter-chassis system control communication between stack members is carried over the reserved VLAN ID 4094 from the global range.</ref>===
 +
*4094 を SWV で使用するため、ユーザは使用できません
 
===その他の制限===
 
===その他の制限===
−
例 : [https://www.cisco.com/c/en/us/td/docs/switches/lan/catalyst9500/software/release/17-3/configuration_guide/ha/b_173_ha_9500_cg/configuring_cisco_stackwise_virtual.html#reference_kph_hgh_nlb Restrictions for Cisco StackWise Virtual]
+
例 : [https://www.cisco.com/c/en/us/td/docs/switches/lan/catalyst9500/software/release/17-3/configuration_guide/ha/b_173_ha_9500_cg/configuring_cisco_stackwise_virtual.html#reference_kph_hgh_nlb Restrictions for Cisco StackWise Virtual] IOS-XE 17.3
    
* 機種により異なるため、使う機種 + IOS-XE バージョンのドキュメントを参照してください
 
* 機種により異なるため、使う機種 + IOS-XE バージョンのドキュメントを参照してください
54行目: 70行目:  
!IOS-XE  
 
!IOS-XE  
 
最小サポート
 
最小サポート
 +
!SWV サポート
 
!ライセンス
 
!ライセンス
 
Network Essencials では動作しません
 
Network Essencials では動作しません
66行目: 83行目:     
WS-C3850-48XS
 
WS-C3850-48XS
 +
|12XS , 24XS : 3.7.1E (15.2(3)E1) <ref>[https://www.cisco.com/c/en/us/td/docs/switches/lan/catalyst3850/software/release/3e/release_notes/rn-3dot7e-3850.html#34642 What’s New in Cisco IOS XE Release 3.7.1E]
 +
 +
New multi-Gigabit stackable switch model that support up to 36 ports at 1G and 12 ports at 100M, 1G, 2.5G, 5G and 10G.
 +
 +
– WS-C3850-24XU-L
 +
 +
– WS-C3850-24XU-S
 +
 +
– WS-C3850-24XU-E
 +
 +
– WS-C3850-12X48U-L
 +
 +
– WS-C3850-12X48U-S
 +
 +
– WS-C3850-12X48U-E
 +
 +
– WS-C3850-12XS-S
 +
 +
– WS-C3850-16XS-S
 +
 +
– WS-C3850-24XS-S
 +
 +
– WS-C3850-32XS-S
 +
 +
– WS-C3850-12XS-E
 +
 +
– WS-C3850-16XS-E
 +
 +
– WS-C3850-24XS-E
 +
 +
– WS-C3850-32XS-E</ref>
 +
48XS : 3.7.2E (15.2(3)E2) <ref>[https://www.cisco.com/c/en/us/td/docs/switches/lan/catalyst3850/software/release/3e/release_notes/rn-3dot7e-3850.html#61691 What’s New in Cisco IOS XE Release 3.7.2E]
 +
 +
New switch models:
 +
 +
– WS-C3850-48XS-S
 +
 +
– WS-C3850-48XS-F-S
 +
 +
– WS-C3850-48XS-E
 +
 +
– WS-C3850-48XS-F-E</ref>
 
|16.3.3 : 初期リリース
 
|16.3.3 : 初期リリース
−
16.5.1a : 非サポート
+
16.5.1a : 非サポート化
 +
 
 
16.6.1 : 再導入
 
16.6.1 : 再導入
 
|IP Base
 
|IP Base
78行目: 138行目:  
|  -
 
|  -
 
|16.12 までは 3850XS でも検証可能
 
|16.12 までは 3850XS でも検証可能
−
ラボで再現させるときに便利
+
ラボで模擬させるときに便利
 
|-
 
|-
 
|C9400
 
|C9400
 
|C9400-SUP-1
 
|C9400-SUP-1
−
|16.9.1
+
C9400-SUP-1-XL
 +
|SUP-1 : 16.6.1 <ref>[https://www.cisco.com/c/en/us/td/docs/switches/lan/catalyst9400/software/release/16-6/release_notes/ol-16-6-9400.html#pgfId-1443641 Supported Hardware on Cisco Catalyst 9400 Series Switches]
 +
 
 +
Table 2 Supported Hardware on Cisco Catalyst 9400 Series Switches
 +
 
 +
C9400-SUP-1</ref>
 +
SUP1-XL : 16.6.2 <ref>[https://www.cisco.com/c/en/us/td/docs/switches/lan/catalyst9400/software/release/16-6/release_notes/ol-16-6-9400.html#pgfId-1473167 Hardware Features in Cisco IOS XE Everest 16.6.2]
 +
 
 +
'''Feature Name'''
 +
 
 +
C9400-SUP-1XL
 +
 
 +
<span name="pgfId-1473145"></span>'''Description and License Level Information'''
 +
 
 +
<span name="pgfId-1473145"></span>Cisco Catalyst 9400 Series Supervisor 1XL Module
 +
 
 +
This supervisor module is supported on C9407R, C9410R chassis.</ref>
 +
|16.9.1-
 +
9410R は 16.11.1-
 
|Network Advantage
 
|Network Advantage
 
C9400-SUP-UPG-LIC=
 
C9400-SUP-UPG-LIC=
91行目: 169行目:  
|C9400X
 
|C9400X
 
|C9400X-SUP-2
 
|C9400X-SUP-2
−
|SUP-2 自体は 17.7.1-
+
C9400X-SUP-2XL
−
SWV は 17.9.1- <ref>[https://www.cisco.com/c/en/us/td/docs/switches/lan/catalyst9400/software/release/17-9/configuration_guide/ha/b_179_ha_9400_cg/configuring_cisco_stackwise_virtual.html#restrictions_for_cisco_stackwise_virtual_9400 Restrictions for Cisco StackWise Virtual]
+
|17.7.1 <ref>[https://www.cisco.com/c/en/us/td/docs/switches/lan/catalyst9400/software/release/17-7/release_notes/ol-17-7-9400.html#concept_twd_rd2_3mb Hardware Features in Cisco IOS XE Cupertino 17.7.1]
 +
 
 +
'''Feature Name'''
 +
 
 +
Cisco Catalyst 9400 Series Supervisor 2 Module (C9400X-SUP-2)
 +
 
 +
'''Description and Documentation Link'''
 +
 
 +
Hardware Features:
 +
 
 +
Supported on Cisco Catalyst C9404R, C9407R, and C9410R chassis.
 +
 
 +
 
 +
'''Feature Name'''
 +
 
 +
Cisco Catalyst 9400 Series Supervisor 2XL Module (C9400X-SUP-2XL)
 +
 
 +
'''Description and Documentation Link'''
 +
 
 +
Hardware Features:
 +
 
 +
Supported on Cisco Catalyst C9404R, C9407R, and C9410R chassis.</ref>
 +
|17.9.1- <ref>[https://www.cisco.com/c/en/us/td/docs/switches/lan/catalyst9400/software/release/17-9/configuration_guide/ha/b_179_ha_9400_cg/configuring_cisco_stackwise_virtual.html#restrictions_for_cisco_stackwise_virtual_9400 Restrictions for Cisco StackWise Virtual]
    
Cisco StackWise Virtual is also supported on Cisco Catalyst 9400X Seried Supervisor 2 Module (C9400X-SUP-2) and Cisco Catalyst 9400 Series Supervisor 2XL Module (C9400X-SUP-2XL).
 
Cisco StackWise Virtual is also supported on Cisco Catalyst 9400X Seried Supervisor 2 Module (C9400X-SUP-2) and Cisco Catalyst 9400 Series Supervisor 2XL Module (C9400X-SUP-2XL).
100行目: 200行目:  
| -
 
| -
 
| 非対応
 
| 非対応
−
|SVL の機能は 17.8.1- 実装されているようだが、SWV 自体実装されていない <ref>[https://www.cisco.com/c/en/us/td/docs/switches/lan/catalyst9400/software/release/17-9/release_notes/ol-17-9-9400/whats_new_in_cisco_ios_cupertino_179x.html#concept_y2x_11f_3mb Software Features in Cisco IOS XE Cupertino 17.9.1]
+
|17.9.1- で SWV が実装された <ref>[https://www.cisco.com/c/en/us/td/docs/switches/lan/catalyst9400/software/release/17-9/release_notes/ol-17-9-9400/whats_new_in_cisco_ios_cupertino_179x.html#concept_y2x_11f_3mb Software Features in Cisco IOS XE Cupertino 17.9.1]
    
Software Features in Cisco IOS XE Cupertino 17.9.1
 
Software Features in Cisco IOS XE Cupertino 17.9.1
107行目: 207行目:     
From Cisco IOS XE Cupertino 17.9.1, the SVL and DAD links are supported on the following SUP-2 and SUP2-XL and the already listed line cards:
 
From Cisco IOS XE Cupertino 17.9.1, the SVL and DAD links are supported on the following SUP-2 and SUP2-XL and the already listed line cards:
 +
</ref> <ref>[https://www.cisco.com/c/en/us/td/docs/switches/lan/catalyst9400/software/release/17-9/configuration_guide/ha/b_179_ha_9400_cg/configuring_cisco_stackwise_virtual.html High Availability Configuration Guide, Cisco IOS XE Cupertino 17.9.x (Catalyst 9400 Switches)]
 +
 +
[https://www.cisco.com/c/en/us/td/docs/switches/lan/catalyst9400/software/release/17-9/configuration_guide/ha/b_179_ha_9400_cg/configuring_cisco_stackwise_virtual.html#restrictions_for_cisco_stackwise_virtual_9400 Restrictions for Cisco StackWise Virtual]
 +
 +
Cisco StackWise Virtual is also supported on Cisco Catalyst 9400X Seried Supervisor 2 Module (C9400X-SUP-2) and Cisco Catalyst 9400 Series Supervisor 2XL Module (C9400X-SUP-2XL).</ref>
   −
</ref>
+
* Release-notes と Configuration Guide の Feature History に SWV の記載が無いがサポートしているようだ
−
Quad SUP は C9400 で非対応のため注意
+
 
 +
 
 +
Quad SUP は C9400 で非対応 <ref>[https://www.cisco.com/c/en/us/td/docs/switches/lan/catalyst9400/software/release/17-9/configuration_guide/ha/b_179_ha_9400_cg/configuring_cisco_stackwise_virtual.html#restrictions_for_cisco_stackwise_virtual_9400 Restrictions for Cisco StackWise Virtual]
 +
 
 +
Cisco StackWise Virtual can be configured only on one supervisor module per chassis. </ref> のため注意
 
|-
 
|-
 
|C9500
 
|C9500
 
|C9500-12Q
 
|C9500-12Q
−
C9500-16X  
+
C9500-16X C9500-24Q C9500-40X
−
C9500-24Q C9500-40X
+
|24Q : 16.5.1a
 +
12Q , 40X : 16.6.1 <ref>[https://www.cisco.com/c/en/us/td/docs/switches/lan/catalyst9500/software/release/16-6/release_notes/ol-16-6-9500.html#pgfId-1445718 Hardware Features in Cisco IOS XE Everest 16.6.1]
 +
 
 +
'''Feature Name'''
 +
 
 +
40-Gigabit Ethernet QSFP and 10-Gigabit Ethernet SFP Switch Models
 +
 
 +
<span name="pgfId-1436488"></span>C9500-12Q
 +
 
 +
<span name="pgfId-1436503"></span>C9500-40X-2Q
 +
 
 +
<span name="pgfId-1436518"></span>C9500-40X
 +
 
 +
<span name="pgfId-1436533"></span>C9500-48X
 +
 
 +
<span name="pgfId-1431072"></span>'''Description'''
 +
 
 +
<span name="pgfId-1431072"></span>These Cisco Catalyst 9500 Series Switches are supported:
 +
 
 +
<span name="pgfId-1436479"></span>C9500-12Q—12 40-Gigabit Ethernet QSFP ports and two power supply slots
 +
 
 +
<span name="pgfId-1436349"></span>C9500-40X-2Q—40 10-Gigabit Ethernet SFP ports and a 2-Port 40-Gigabit Ethernet (QSFP) network module on uplink ports; and two power supply slots
 +
 
 +
<span name="pgfId-1436263"></span>C9500-40X—40 10-Gigabit Ethernet SFP ports and two power supply slots; support for optional network modules on uplink ports — 8-Port 10 Gigabit Ethernet (SFP) and 2-Port 40 Gigabit Ethernet (QSFP)
 +
 
 +
<span name="pgfId-1436332"></span>C9500-48X—40 10-Gigabit Ethernet SFP ports and an 8-Port 10-Gigabit Ethernet (SFP) network module on uplink ports; and two power supply slots</ref>
 
|16.6.1 <ref>[https://www.cisco.com/c/en/us/td/docs/switches/lan/catalyst9500/software/release/17-9/configuration_guide/ha/b_179_ha_9500_cg/configuring_cisco_stackwise_virtual.html#reference_rfl_vdy_31b Feature History for Cisco StackWise Virtual]
 
|16.6.1 <ref>[https://www.cisco.com/c/en/us/td/docs/switches/lan/catalyst9500/software/release/17-9/configuration_guide/ha/b_179_ha_9500_cg/configuring_cisco_stackwise_virtual.html#reference_rfl_vdy_31b Feature History for Cisco StackWise Virtual]
   131行目: 265行目:  
|C9500H
 
|C9500H
 
|C9500-32C
 
|C9500-32C
−
C9500-32QC  
+
C9500-32QC C9500-48Y4C
 +
 
 +
C9500-24Y4C
 +
|16.8.1a <ref>[https://www.cisco.com/c/en/us/td/docs/switches/lan/catalyst9500/software/release/16-8/release_notes/ol-16-8-9500.html#concept_pqp_tqx_fdb__hw-1681-9500-Starfleet Hardware Features Introduced on Cisco Catalyst 9500 Series Switches-High Performance]
 +
 
 +
'''Feature Name'''
 +
 
 +
Cisco Catalyst 9500 Series Switches - High Performance
 +
 
 +
'''Description'''
 +
 
 +
High Performance models introduced in the series:
 +
 
 +
C9500-32C
 +
 
 +
This model has 32 QSFP28 ports that support 40/100 GigabitEthernet connectivity and two power supply slots.
 +
 
 +
C9500-32QC
 +
 
 +
This model has 32 QSFP28 ports, where you can have 24 ports that support 40-GigabitEthernet connectivity and 4 ports that support 100-GigabitEthernet connectivity, OR 32 ports that support 40-GigabitEthernet connectivity, OR 16 ports that support 100-GigabitEthernet connectivity, and two power supply slots.
 +
 
 
C9500-48Y4C
 
C9500-48Y4C
 +
 +
This model has 48 SFP28 ports that support 1/10/25-GigabitEthernet connectivity, four QSFP uplink ports that support 40/100 -GigabitEthernet connectivity, and two power supply slots.
    
C9500-24Y4C
 
C9500-24Y4C
 +
 +
The model has 24 SFP28 ports that support 1/10/25-GigabitEthernet connectivity, four QSFP uplink ports that support 40/100-GigabitEthernet connectivity, and two power supply slots.</ref>
 
|16.10.1 <ref>[https://www.cisco.com/c/en/us/td/docs/switches/lan/catalyst9500/software/release/17-9/configuration_guide/ha/b_179_ha_9500_cg/configuring_cisco_stackwise_virtual.html#reference_rfl_vdy_31b Feature History for Cisco StackWise Virtual]
 
|16.10.1 <ref>[https://www.cisco.com/c/en/us/td/docs/switches/lan/catalyst9500/software/release/17-9/configuration_guide/ha/b_179_ha_9500_cg/configuring_cisco_stackwise_virtual.html#reference_rfl_vdy_31b Feature History for Cisco StackWise Virtual]
   151行目: 309行目:  
|  -
 
|  -
 
|今後の主流
 
|今後の主流
−
24Y or 48Y の 100G で SVL を組むともったいないため、25G x4 or 8 ってのもあり
+
24Y or 48Y の 100G で SVL を組むと 100G がもったいないため、25G x4 or 8 で組むのがおすすめ
 +
 
 +
* 25G 対応機器はまだまだ少ない
 +
 
 +
 
 +
32QC はデフォルトで物理ポート番号 1-24 が 40G , 25,27,29,31 が 100G として動作する <ref>[https://www.cisco.com/c/en/us/td/docs/switches/lan/catalyst9500/software/release/17-3/configuration_guide/int_hw/b_173_int_and_hw_9500_cg/configuring_interface_characteristics.html#id_69280 Configuring Hundred GigabitEthernet Interfaces on C9500-32QC]
 +
 
 +
The default status of the 40 GigabitEthernet and 100 GigabitEthernet interfaces is as below:
 +
 
 +
Port numbers 1 to 24 are active as 40 GigabitEthernet interfaces, by default. The corresponding 100 GigabitEthernet interfaces for these ports become inactive. To enable the 100 GigabitEthernet interfaces - 33 to 44, use the enable command on the 40 GigabitEthernet interface.
 +
 
 +
Port numbers 25 to 32 are active as 100 GigabitEthernet interfaces, by default. The corresponding 40 GigabitEthernet interfaces for these ports become inactive. To enable the 40 GigabitEthernet interfaces on these ports - 25 to 32, use the no enable command on the 100 GigabitEthernet interface.</ref>
 +
 
 +
* SVL としては 1-24 番ポートに QSFP-100G を搭載できない
 +
 
 +
 
 +
32C は 1-16 番ポートしか SVL が組めない <ref>[https://www.cisco.com/c/en/us/td/docs/switches/lan/catalyst9500/software/release/17-9/configuration_guide/ha/b_179_ha_9500_cg/configuring_cisco_stackwise_virtual.html#reference_kph_hgh_nlb Restrictions for Cisco Catalyst 9500 Series High Performance Switches]
 +
 
 +
On C9500-32C switches, you can '''configure SVL and DAD only on interfaces numbered 1-16 on the front panel''' of the switch.</ref> ため、注意
 
|-
 
|-
 
| rowspan="2" |C9500X
 
| rowspan="2" |C9500X
 
|C9500X-28C8D
 
|C9500X-28C8D
 +
|17.7.1 <ref>[https://www.cisco.com/c/en/us/td/docs/switches/lan/catalyst9500/software/release/17-7/release_notes/ol-17-7-9500.html#concept_twd_rd2_3mb Hardware Features in Cisco IOS XE Cupertino 17.7.1]
 +
 +
'''Feature Name'''
 +
 +
Cisco Catalyst 9500X Series Switches (C9500X-28C8D)
 +
 +
'''Description and Documentation Link'''
 +
 +
The following new model is introduced in the series:
 +
 +
C9500X-28C8D: 28x100G QSFP28 and 8x400G QSFP-DD ports; 2 power supply slots</ref>
 
|17.10.1 <ref>[https://www.cisco.com/c/en/us/td/docs/switches/lan/catalyst9500/software/release/17-11/configuration_guide/ha/b_1711_ha_9500_cg/configuring_cisco_stackwise_virtual.html Feature History for Cisco StackWise Virtual]
 
|17.10.1 <ref>[https://www.cisco.com/c/en/us/td/docs/switches/lan/catalyst9500/software/release/17-11/configuration_guide/ha/b_1711_ha_9500_cg/configuring_cisco_stackwise_virtual.html Feature History for Cisco StackWise Virtual]
   166行目: 353行目:  
|  -
 
|  -
 
|Silicon One ASIC 搭載機
 
|Silicon One ASIC 搭載機
−
17.12.x の安定版からちゃんと動くか ?
+
17.12.x の長期メンテナンス版からちゃんと動くか ?
 
|-
 
|-
 
|C9500X-60L4D
 
|C9500X-60L4D
−
|17.10.1b <ref>[https://www.cisco.com/c/en/us/td/docs/switches/lan/catalyst9500/software/release/17-11/configuration_guide/ha/b_1711_ha_9500_cg/configuring_cisco_stackwise_virtual.html#feature_history_for_cisco_stackwise_virtual Feature History for Cisco StackWise Virtual]
+
|17.10.1b <ref>[https://www.cisco.com/c/en/us/td/docs/switches/lan/catalyst9500/software/release/17-10/release_notes/ol-17-10-9500/whats_new_in_cisco_ios_dublin_1710x.html#rn-hw-features-17101.xml Hardware Features in Cisco IOS XE Dublin 17.10.1b]
 +
 
 +
'''Feature Name'''
 +
 
 +
Cisco Catalyst 9500X Series Switches (C9500X-60L4D)
 +
 
 +
'''Description'''
 +
 
 +
The following model is introduced in the series:
   −
Cisco IOS XE Dublin 17.10.1b
+
C9500X-60L4D: 60x50G SFP56 and 4x400G QSFP-DD ports; 2 power supply slots</ref>
 +
|17.11.1 <ref>[https://www.cisco.com/c/en/us/td/docs/switches/lan/catalyst9500/software/release/17-11/release_notes/ol-17-11-9500/whats_new_in_cisco_ios_dublin_1711x.html#topic-rn-sw-features-17111.xml Software Features in Cisco IOS XE Dublin 17.11.1]
 +
 
 +
'''Feature Name'''
    
Cisco StackWise Virtual
 
Cisco StackWise Virtual
   −
Support for this feature was introduced on the C9500X-60L4D model of Cisco Catalyst 9500 Series Switches.</ref>
+
'''Description'''
 +
 
 +
Starting with this release, the feature is supported on the C9500X-60L4D model of Cisco Catalyst 9500X Series Switches.</ref>
 
|Network Advantage
 
|Network Advantage
 
|  -
 
|  -
 
|  -
 
|  -
 
|Silicon One ASIC 搭載機
 
|Silicon One ASIC 搭載機
−
17.12.x の安定版からちゃんと動くか ?
+
17.12.x の長期メンテナンス版からちゃんと動くか ?
 
|-
 
|-
 
|C9600
 
|C9600
 
|C9600-SUP-1
 
|C9600-SUP-1
 +
|16.11.1 <ref>[https://www.cisco.com/c/en/us/td/docs/switches/lan/catalyst9600/software/release/16-11/release_notes/ol-16-11-9600.html#concept_wx1_wzk_1hb Supported Hardware on Cisco Catalyst 9600 Series Switches]
 +
 +
'''Supervisor Modules'''
 +
 +
C9600-SUP-1
 +
 +
'''Description'''
 +
 +
Cisco Catalyst 9600 Series Supervisor 1 Module
 +
 +
This supervisor module is supported on the C9606R chassis</ref>
 
|16.12.1
 
|16.12.1
 
|Network Advantage
 
|Network Advantage
 
|  -
 
|  -
−
|17.2.x- 以降
+
|17.2.x- 以降 <ref>[https://www.cisco.com/c/en/us/td/docs/switches/lan/catalyst9600/software/release/17-2/configuration_guide/ha/b_172_ha_9600_cg/quad_supervisor_with_route_processor_redundancy.html High Availability Configuration Guide, Cisco IOS XE Amsterdam 17.2.x (Catalyst 9600 Switches)]
 +
 
 +
[https://www.cisco.com/c/en/us/td/docs/switches/lan/catalyst9600/software/release/17-2/configuration_guide/ha/b_172_ha_9600_cg/quad_supervisor_with_route_processor_redundancy.html#id_127161 Prerequisites for Quad-Supervisor with RPR]
 +
 
 +
The minimum required software version for all the supervisors in the Quad-Supervisor setup is Cisco IOS XE Amsterdam 17.2.1 .</ref>
 
|DAD はラインカード型式に制限あり <ref>[https://www.cisco.com/c/en/us/td/docs/switches/lan/catalyst9600/software/release/17-12/configuration_guide/ha/b_1712_ha_9600_cg/configuring_cisco_stackwise_virtual.html#feature_history_for_cisco_stackwise_virtual Feature History for Cisco StackWise Virtual]
 
|DAD はラインカード型式に制限あり <ref>[https://www.cisco.com/c/en/us/td/docs/switches/lan/catalyst9600/software/release/17-12/configuration_guide/ha/b_1712_ha_9600_cg/configuring_cisco_stackwise_virtual.html#feature_history_for_cisco_stackwise_virtual Feature History for Cisco StackWise Virtual]
   206行目: 421行目:  
|C9600X
 
|C9600X
 
|C9600X-SUP-2
 
|C9600X-SUP-2
 +
|17.7.1 <ref>[https://www.cisco.com/c/en/us/td/docs/switches/lan/catalyst9600/software/release/17-7/release_notes/ol-17-7-9600.html#concept_twd_rd2_3mb Hardware Features in Cisco IOS XE Cupertino 17.7.1]
 +
 +
'''Feature Name'''
 +
 +
Cisco Catalyst 9600 Series Supervisor Engine 2 (C9600X-SUP-2)
 +
 +
'''Description and Documentation Link'''
 +
 +
This supervisor engine is supported on Cisco Catalyst 9600 Series 6 Slot Chassis (C9606R).</ref>
 
|17.10.1 <ref>[https://www.cisco.com/c/en/us/td/docs/switches/lan/catalyst9600/software/release/17-10/configuration_guide/ha/b_1710_ha_9600_cg/configuring_cisco_stackwise_virtual.html#feature_history_for_cisco_stackwise_virtual Feature History for Cisco StackWise Virtual]
 
|17.10.1 <ref>[https://www.cisco.com/c/en/us/td/docs/switches/lan/catalyst9600/software/release/17-10/configuration_guide/ha/b_1710_ha_9600_cg/configuring_cisco_stackwise_virtual.html#feature_history_for_cisco_stackwise_virtual Feature History for Cisco StackWise Virtual]
   221行目: 445行目:     
・C9600X-SUP-2 on a C9606R chassis does not support Quad-Supervisor with RPR.</ref>
 
・C9600X-SUP-2 on a C9606R chassis does not support Quad-Supervisor with RPR.</ref>
−
|未実装
+
|Silicon One ASIC 搭載機
 +
17.12.x の長期メンテナンス版からちゃんと動くか ?
 
|}
 
|}
   −
== リンク ==
+
== その他リンク ==
 
[https://www.cisco.com/c/ja_jp/support/docs/switches/catalyst-9600-series-switches/215627-catalyst-9600-migration-to-quad-superv.html Catalyst 9600のクアッドスーパーバイザStackwise仮想セットアップへの移行]
 
[https://www.cisco.com/c/ja_jp/support/docs/switches/catalyst-9600-series-switches/215627-catalyst-9600-migration-to-quad-superv.html Catalyst 9600のクアッドスーパーバイザStackwise仮想セットアップへの移行]
 +
 +
== 更新履歴 ==
 +
2023-08-30 : 初版
 +
 +
2024-01-24 : 各機種の IOS-XE 最小サポート Ver を追加
 +
 +
2024-04-03 : 各種制限の引用を追加
    
== 引用 ==
 
== 引用 ==
 
[[カテゴリ:Cisco]]
 
[[カテゴリ:Cisco]]
 
[[カテゴリ:Catalyst]]
 
[[カテゴリ:Catalyst]]
「http://hkatou.net/wiki/特別:携帯機器差分/1350...1911」から取得

案内メニュー