1行目: |
1行目: |
| Cisco Catalyst StackWise Virtual についてまとめました。 | | Cisco Catalyst StackWise Virtual についてまとめました。 |
| | | |
− | 動作しない構成で売るのは、やめてクレメンス。
| + | ==設定ガイドライン== |
| + | |
| + | === 初期リリースの制限 === |
| + | *すべてのプラットフォームで、初期リリースの IOS-XE では StackWise Virtual がサポートされません |
| + | *例) C9400X-SUP-2 は、17.7.1 から使用できますが、17.12.x でも未だに SWV が動作しません |
| + | |
| + | === 機能追加 === |
| + | *C9500 のアップリンク モジュールで、SVL が使用できないリリースがありました |
| + | |
| + | === SVL は 8 ポートまで === |
| + | |
| + | === SVL を設定できるポートには制限があります === |
| + | *C9500-16X , 40X : 10G はアップリンクモジュールと混在可能、40G は混在不可 |
| + | **使用可能なバージョンに注意 |
| + | **40G アップリンクモジュールは、オンボードの 10G と速度が異なるため、SVL に混在できません |
| + | *C9500-32C : 1-16 ポートのみ設定可能 |
| + | *ブレークアウト , QSA アダプタは SVL , DAD ポートで基本的にサポートされません <ref>[https://www.cisco.com/c/en/us/td/docs/switches/lan/catalyst9500/software/release/17-10/release_notes/ol-17-10-9500/limitations_and_restrictions.html#rn-limitations-restrictions-1710x.xml Limitations and Restrictions] On Cisco Catalyst 9500 Series Switches, when Cisco StackWise Virtual is configured, breakout ports using 4X10G breakout cables, or the Cisco QSFP to SFP or SFP+ Adapter (QSA) module can only be used as data ports; they cannot be used to configure StackWise Virtual links (SVLs) or dual-active detective (DAD) links.</ref> |
| + | **C9500 は QSA アダプタを使用しても、SVL に使用できません |
| + | **C9600 は例外で QSA アダプタを使用して、SVL に使用できます <ref>High Availability Configuration Guide, Cisco IOS XE Dublin 17.10.x (Catalyst 9600 Switches) |
| + | |
| + | [https://www.cisco.com/c/en/us/td/docs/switches/lan/catalyst9600/software/release/17-10/configuration_guide/ha/b_1710_ha_9600_cg/configuring_cisco_stackwise_virtual.html#restrictions_for_cisco_stackwise_virtual_9600 Restrictions for Cisco StackWise Virtual] |
| + | |
| + | In a Cisco StackWise Virtual solution, QSA along with 10G interfaces can be used as data ports or SVL or DAD links. |
| + | |
| + | In a Cisco StackWise Virtual solution, QSA along with 1G interfaces can be used as data ports or DAD links. SVL links are not supported on 1G interfaces.</ref> |
| + | *10G 以上の速度で SVL/DAD はサポートされ、1G は SVL で動作せず、DAD には対応します |
| + | |
| + | === SVL の速度は同一である必要があります === |
| + | *10G / 25G 両対応ポートでは、トランシーバを搭載することでモードが確定するため、25G の場合は搭載しないと設定ができません |
| + | |
| + | === C9500-24Y4C , 48Y4C で 25G ポートを SVL に使用できます === |
| + | *100G ポートを温存したい場合に有効 |
| + | |
| + | *増速などの設定変更時、再起動が必要です |
| + | **C9500X , C9600X など Silicon One 系では再起動が必要なくなりました |
| + | |
| + | === Network Advantage ライセンスが必要です === |
| + | *C9404R + SUP1 では、さらに C9400-SUP-UPG-LIC= ライセンスが必要 <ref>[https://www.cisco.com/c/en/us/td/docs/switches/lan/catalyst9400/software/release/16-9/release_notes/ol-16-9-9400.html#concept_gby_2p1_j2b Software Features in Cisco IOS XE Fuji 16.9.1] Supervisor Modules Cisco Catalyst 9400 Series Supervisor 1 Module (C9400-SUP-1). The feature requires a special, additional, C9400-SUP-UPG-LIC= license with this supervisor module.</ref> |
| + | ===Vlan ID=== |
| + | *4094 は使用できません |
| + | ===その他の制限=== |
| + | 例 : [https://www.cisco.com/c/en/us/td/docs/switches/lan/catalyst9500/software/release/17-3/configuration_guide/ha/b_173_ha_9500_cg/configuring_cisco_stackwise_virtual.html#reference_kph_hgh_nlb Restrictions for Cisco StackWise Virtual] |
| + | |
| + | * 機種により異なるため、使う機種 + IOS-XE バージョンのドキュメントを参照してください |
| + | |
| + | == StackWise Virtual サポート マトリックス == |
| {| class="wikitable" | | {| class="wikitable" |
| |+Catalyst 3850 / 9400 / 9400X /9500 / 9500X / 9600 / 9600X | | |+Catalyst 3850 / 9400 / 9400X /9500 / 9500X / 9600 / 9600X |
| StackWise Virtual サポート マトリックス | | StackWise Virtual サポート マトリックス |
− | ! | + | !ファミリ |
− | ! | + | !機種 |
| !IOS-XE | | !IOS-XE |
| 最小サポート | | 最小サポート |
− | !ライセンス#1 | + | !ライセンス |
| Network Essencials では動作しません | | Network Essencials では動作しません |
− | !ライセンス#2
| |
| !SVL/DAD | | !SVL/DAD |
| ポート番号制限 | | ポート番号制限 |
23行目: |
67行目: |
| WS-C3850-48XS | | WS-C3850-48XS |
| |16.3.3 : 初期リリース | | |16.3.3 : 初期リリース |
| + | 16.5.1a : 非サポート |
| 16.6.1 : 再導入 | | 16.6.1 : 再導入 |
| |IP Base | | |IP Base |
| IP Services | | IP Services |
− | | - | + | |SVL/DAD はアップリンクモジュール/ポートで設定不可 <ref>[https://www.cisco.com/c/en/us/td/docs/switches/lan/catalyst3850/software/release/16-12/configuration_guide/stck_mgr_ha/b_1612_stck_mgr_ha_3850_cg/configuring_cisco_stackwise_virtual.html#concept_a3l_vl3_jdb Restrictions for Cisco StackWise Virtual] |
− | |
| + | |
− | | - | + | Configuring SVLs on any of the network modules is not supported. |
| + | |
| + | Dual-Active Detection is not supported on the uplink ports of the switch.</ref> |
| + | | - |
| |16.12 までは 3850XS でも検証可能 | | |16.12 までは 3850XS でも検証可能 |
| + | ラボで再現させるときに便利 |
| |- | | |- |
| |C9400 | | |C9400 |
35行目: |
84行目: |
| |16.9.1 | | |16.9.1 |
| |Network Advantage | | |Network Advantage |
− | |C9400-SUP-UPG-LIC=
| + | C9400-SUP-UPG-LIC= |
− | |
| |
| | - | | | - |
− | |なぜか追加ライセンスが必要 | + | | 非対応 |
| + | |なぜか C9400-SUP-1 のみ追加ライセンスが必要 |
| |- | | |- |
− | | | + | |C9400X |
| |C9400X-SUP-2 | | |C9400X-SUP-2 |
− | |2023/08/30 | + | |SUP-2 自体は 17.7.1- |
− | 未サポート
| + | SWV は 17.9.1- <ref>[https://www.cisco.com/c/en/us/td/docs/switches/lan/catalyst9400/software/release/17-9/configuration_guide/ha/b_179_ha_9400_cg/configuring_cisco_stackwise_virtual.html#restrictions_for_cisco_stackwise_virtual_9400 Restrictions for Cisco StackWise Virtual] |
| + | |
| + | Cisco StackWise Virtual is also supported on Cisco Catalyst 9400X Seried Supervisor 2 Module (C9400X-SUP-2) and Cisco Catalyst 9400 Series Supervisor 2XL Module (C9400X-SUP-2XL). |
| + | |
| + | Line cards C9400-LC-48HX and C9400-LC-48XS must be used with a C9400X Supervisor (for example, C9400X-SUP-2XL or C9400X-SUP-2).</ref> |
| + | | Network Advantage |
| | - | | | - |
− | | - | + | | 非対応 |
− | |
| + | |SVL の機能は 17.8.1- 実装されているようだが、SWV 自体実装されていない <ref>[https://www.cisco.com/c/en/us/td/docs/switches/lan/catalyst9400/software/release/17-9/release_notes/ol-17-9-9400/whats_new_in_cisco_ios_cupertino_179x.html#concept_y2x_11f_3mb Software Features in Cisco IOS XE Cupertino 17.9.1] |
− | | -
| + | |
− | |まーだ実装されないんですかねぇ
| + | Software Features in Cisco IOS XE Cupertino 17.9.1 |
| + | |
| + | SVL support on uplink and downlink with 9400X |
| + | |
| + | From Cisco IOS XE Cupertino 17.9.1, the SVL and DAD links are supported on the following SUP-2 and SUP2-XL and the already listed line cards: |
| + | |
| + | </ref> |
| + | Quad SUP は C9400 で非対応のため注意 |
| |- | | |- |
| |C9500 | | |C9500 |
− | |C9500-12Q, C9500-16X, | + | |C9500-12Q |
− | C9500-24Q, C9500-40X | + | C9500-16X |
| + | C9500-24Q C9500-40X |
| |16.6.1 <ref>[https://www.cisco.com/c/en/us/td/docs/switches/lan/catalyst9500/software/release/17-9/configuration_guide/ha/b_179_ha_9500_cg/configuring_cisco_stackwise_virtual.html#reference_rfl_vdy_31b Feature History for Cisco StackWise Virtual] | | |16.6.1 <ref>[https://www.cisco.com/c/en/us/td/docs/switches/lan/catalyst9500/software/release/17-9/configuration_guide/ha/b_179_ha_9500_cg/configuring_cisco_stackwise_virtual.html#reference_rfl_vdy_31b Feature History for Cisco StackWise Virtual] |
| | | |
61行目: |
123行目: |
| Support for this feature was introduced only on the C9500-12Q, C9500-16X, C9500-24Q, C9500-40X models of the Cisco Catalyst 9500 Series Switches.</ref> | | Support for this feature was introduced only on the C9500-12Q, C9500-16X, C9500-24Q, C9500-40X models of the Cisco Catalyst 9500 Series Switches.</ref> |
| |Network Advantage | | |Network Advantage |
− | | - | + | | -16.10.x : ネットワーク モジュールで使用不可 |
− | | -16.10.x : ネットワーク モジュールで使用不可
| |
| 16.11.x- : ネットワーク モジュールも SVL/DAD に使用可能 | | 16.11.x- : ネットワーク モジュールも SVL/DAD に使用可能 |
− | | - | + | | - |
| |よくみるやつ | | |よくみるやつ |
− | EoS 出てるので今後のデプロイは少なくなる | + | EoS が出てるので今後のデプロイは少なくなる |
| |- | | |- |
| |C9500H | | |C9500H |
− | |C9500-32C, C9500-32QC, | + | |C9500-32C |
− | C9500-48Y4C, and C9500-24Y4C | + | C9500-32QC |
| + | C9500-48Y4C |
| + | |
| + | C9500-24Y4C |
| |16.10.1 <ref>[https://www.cisco.com/c/en/us/td/docs/switches/lan/catalyst9500/software/release/17-9/configuration_guide/ha/b_179_ha_9500_cg/configuring_cisco_stackwise_virtual.html#reference_rfl_vdy_31b Feature History for Cisco StackWise Virtual] | | |16.10.1 <ref>[https://www.cisco.com/c/en/us/td/docs/switches/lan/catalyst9500/software/release/17-9/configuration_guide/ha/b_179_ha_9500_cg/configuring_cisco_stackwise_virtual.html#reference_rfl_vdy_31b Feature History for Cisco StackWise Virtual] |
| | | |
79行目: |
143行目: |
| Support for this feature was introduced on the C9500-32C, C9500-32QC, C9500-48Y4C, and C9500-24Y4C models of the Cisco Catalyst 9500 Series Switches.</ref> | | Support for this feature was introduced on the C9500-32C, C9500-32QC, C9500-48Y4C, and C9500-24Y4C models of the Cisco Catalyst 9500 Series Switches.</ref> |
| |Network Advantage | | |Network Advantage |
− | | -
| |
| |32C : 1-16 ポートのみ <ref>[https://www.cisco.com/c/en/us/td/docs/switches/lan/catalyst9500/software/release/17-12/configuration_guide/ha/b_1712_ha_9500_cg/configuring_cisco_stackwise_virtual.html#restrictions_for_cisco_stackwise_virtual_9500 Restrictions for Cisco Catalyst 9500 Series High Performance Switches] | | |32C : 1-16 ポートのみ <ref>[https://www.cisco.com/c/en/us/td/docs/switches/lan/catalyst9500/software/release/17-12/configuration_guide/ha/b_1712_ha_9500_cg/configuring_cisco_stackwise_virtual.html#restrictions_for_cisco_stackwise_virtual_9500 Restrictions for Cisco Catalyst 9500 Series High Performance Switches] |
| | | |
86行目: |
149行目: |
| | | |
| On C9500-32QC, you can configure SVL and DAD only on native 100G and 40G interfaces (default configuration ports). You cannot configure SVL and DAD on converted 100G and 40G interfaces.</ref> | | On C9500-32QC, you can configure SVL and DAD only on native 100G and 40G interfaces (default configuration ports). You cannot configure SVL and DAD on converted 100G and 40G interfaces.</ref> |
− | | - | + | | - |
| |今後の主流 | | |今後の主流 |
| 24Y or 48Y の 100G で SVL を組むともったいないため、25G x4 or 8 ってのもあり | | 24Y or 48Y の 100G で SVL を組むともったいないため、25G x4 or 8 ってのもあり |
| |- | | |- |
− | |C9500X | + | | rowspan="2" |C9500X |
| |C9500X-28C8D | | |C9500X-28C8D |
| |17.10.1 <ref>[https://www.cisco.com/c/en/us/td/docs/switches/lan/catalyst9500/software/release/17-11/configuration_guide/ha/b_1711_ha_9500_cg/configuring_cisco_stackwise_virtual.html Feature History for Cisco StackWise Virtual] | | |17.10.1 <ref>[https://www.cisco.com/c/en/us/td/docs/switches/lan/catalyst9500/software/release/17-11/configuration_guide/ha/b_1711_ha_9500_cg/configuring_cisco_stackwise_virtual.html Feature History for Cisco StackWise Virtual] |
100行目: |
163行目: |
| Support for this feature was introduced on the C9500X-28C8D model of Cisco Catalyst 9500 Series Switches.</ref> | | Support for this feature was introduced on the C9500X-28C8D model of Cisco Catalyst 9500 Series Switches.</ref> |
| |Network Advantage | | |Network Advantage |
− | | - | + | | - |
− | | - | + | | - |
− | | -
| |
| |Silicon One ASIC 搭載機 | | |Silicon One ASIC 搭載機 |
| 17.12.x の安定版からちゃんと動くか ? | | 17.12.x の安定版からちゃんと動くか ? |
| |- | | |- |
− | |
| |
| |C9500X-60L4D | | |C9500X-60L4D |
| |17.10.1b <ref>[https://www.cisco.com/c/en/us/td/docs/switches/lan/catalyst9500/software/release/17-11/configuration_guide/ha/b_1711_ha_9500_cg/configuring_cisco_stackwise_virtual.html#feature_history_for_cisco_stackwise_virtual Feature History for Cisco StackWise Virtual] | | |17.10.1b <ref>[https://www.cisco.com/c/en/us/td/docs/switches/lan/catalyst9500/software/release/17-11/configuration_guide/ha/b_1711_ha_9500_cg/configuring_cisco_stackwise_virtual.html#feature_history_for_cisco_stackwise_virtual Feature History for Cisco StackWise Virtual] |
116行目: |
177行目: |
| Support for this feature was introduced on the C9500X-60L4D model of Cisco Catalyst 9500 Series Switches.</ref> | | Support for this feature was introduced on the C9500X-60L4D model of Cisco Catalyst 9500 Series Switches.</ref> |
| |Network Advantage | | |Network Advantage |
− | | - | + | | - |
− | | - | + | | - |
− | | -
| |
| |Silicon One ASIC 搭載機 | | |Silicon One ASIC 搭載機 |
| 17.12.x の安定版からちゃんと動くか ? | | 17.12.x の安定版からちゃんと動くか ? |
126行目: |
186行目: |
| |16.12.1 | | |16.12.1 |
| |Network Advantage | | |Network Advantage |
− | | - | + | | - |
− | | -
| + | |17.2.x- 以降 |
− | |17.2.X以降 | |
| |DAD はラインカード型式に制限あり <ref>[https://www.cisco.com/c/en/us/td/docs/switches/lan/catalyst9600/software/release/17-12/configuration_guide/ha/b_1712_ha_9600_cg/configuring_cisco_stackwise_virtual.html#feature_history_for_cisco_stackwise_virtual Feature History for Cisco StackWise Virtual] | | |DAD はラインカード型式に制限あり <ref>[https://www.cisco.com/c/en/us/td/docs/switches/lan/catalyst9600/software/release/17-12/configuration_guide/ha/b_1712_ha_9600_cg/configuring_cisco_stackwise_virtual.html#feature_history_for_cisco_stackwise_virtual Feature History for Cisco StackWise Virtual] |
| | | |
155行目: |
214行目: |
| Support for this feature was introduced on the Cisco Catalyst 9600 Series Supervisor 2 Module (C9600X-SUP-2).</ref> | | Support for this feature was introduced on the Cisco Catalyst 9600 Series Supervisor 2 Module (C9600X-SUP-2).</ref> |
| |Network Advantage | | |Network Advantage |
− | | - | + | | - |
− | | -
| |
| |2023/08/30 | | |2023/08/30 |
| 未サポート <ref>[https://www.cisco.com/c/en/us/td/docs/switches/lan/catalyst9600/software/release/17-12/configuration_guide/ha/b_1712_ha_9600_cg/configuring_cisco_stackwise_virtual.html#restrictions_for_cisco_stackwise_virtual_9600 Restrictions for Cisco StackWise Virtual] | | 未サポート <ref>[https://www.cisco.com/c/en/us/td/docs/switches/lan/catalyst9600/software/release/17-12/configuration_guide/ha/b_1712_ha_9600_cg/configuring_cisco_stackwise_virtual.html#restrictions_for_cisco_stackwise_virtual_9600 Restrictions for Cisco StackWise Virtual] |