295行目: |
295行目: |
| === Catalyst 9400X / 9500X / 9600X === | | === Catalyst 9400X / 9500X / 9600X === |
| Silicon One の X 系は SWV の SVL / DAD の変更で再起動が必要なくなりました <ref>[https://www.cisco.com/c/en/us/td/docs/switches/lan/catalyst9500/software/release/17-10/configuration_guide/ha/b_1710_ha_9500_cg/configuring_cisco_stackwise_virtual.html#configuring_cisco_stackwise_virtual_link Dynamic addition and removal of SVL links are supported on the C9500X-28C8D model of Cisco Catalyst 9500 Series Switches, and therefore, a reload is not required for adding or removing the SVL links when the device is already operating in SVL mode.]</ref> | | Silicon One の X 系は SWV の SVL / DAD の変更で再起動が必要なくなりました <ref>[https://www.cisco.com/c/en/us/td/docs/switches/lan/catalyst9500/software/release/17-10/configuration_guide/ha/b_1710_ha_9500_cg/configuring_cisco_stackwise_virtual.html#configuring_cisco_stackwise_virtual_link Dynamic addition and removal of SVL links are supported on the C9500X-28C8D model of Cisco Catalyst 9500 Series Switches, and therefore, a reload is not required for adding or removing the SVL links when the device is already operating in SVL mode.]</ref> |
| + | |
| + | === Nexus3000 <ref>[https://community.cisco.com/t5/tkb-%E3%83%87%E3%83%BC%E3%82%BF%E3%82%BB%E3%83%B3%E3%82%BF%E3%83%BC-%E3%83%89%E3%82%AD%E3%83%A5%E3%83%A1%E3%83%B3%E3%83%88/nexus-%E3%82%B7%E3%83%AA%E3%83%BC%E3%82%BA-cvr-qsfp-sfp10g-%E3%81%AE%E5%88%A9%E7%94%A8%E6%96%B9%E6%B3%95%E3%81%AB%E3%81%A4%E3%81%84%E3%81%A6/ta-p/3689358#toc-hId-1189404436 Nexus 3000 シリーズ] |
| + | |
| + | switch(config)# hardware profile portmode ? |
| + | 48x10g+4x40g 48x10G+4x40G port mode |
| + | 52x10g+3x40g 52x10G+3x40G port mode |
| + | 56x10g+2x40g 56x10G+2x40G port mode |
| + | 60x10g+1x40g 60x10G+1x40G port mode |
| + | 64x10g 64x10G port mode</ref> === |
| + | |
| + | ==== hardware profile portmode <port_mode> ==== |
| + | |
| + | === Nexus 3100 <ref>[https://community.cisco.com/t5/tkb-%E3%83%87%E3%83%BC%E3%82%BF%E3%82%BB%E3%83%B3%E3%82%BF%E3%83%BC-%E3%83%89%E3%82%AD%E3%83%A5%E3%83%A1%E3%83%B3%E3%83%88/nexus-%E3%82%B7%E3%83%AA%E3%83%BC%E3%82%BA-cvr-qsfp-sfp10g-%E3%81%AE%E5%88%A9%E7%94%A8%E6%96%B9%E6%B3%95%E3%81%AB%E3%81%A4%E3%81%84%E3%81%A6/ta-p/3689358#toc-hId--618050027 Nexus 3100/3200 シリーズ] |
| + | |
| + | switch(config)# interface breakout module 1 port 49 map 10g-4x |
| + | Interface breakout configured. Please poweroff and no poweroff the module</ref> === |
| + | |
| + | ==== 例) interface breakout module 1 port 49 map 10g-4x ==== |
| + | |
| + | === Nexus 5600/6000 <ref>[https://community.cisco.com/t5/tkb-%E3%83%87%E3%83%BC%E3%82%BF%E3%82%BB%E3%83%B3%E3%82%BF%E3%83%BC-%E3%83%89%E3%82%AD%E3%83%A5%E3%83%A1%E3%83%B3%E3%83%88/nexus-%E3%82%B7%E3%83%AA%E3%83%BC%E3%82%BA-cvr-qsfp-sfp10g-%E3%81%AE%E5%88%A9%E7%94%A8%E6%96%B9%E6%B3%95%E3%81%AB%E3%81%A4%E3%81%84%E3%81%A6/ta-p/3689358#toc-hId-1869462806 Nexus 5600/6000 シリーズ] |
| + | switch(config)# interface breakout slot 2 port 1-4 map 10g-4x |
| + | |
| + | Interface breakout configured. Please poweroff and no poweroff the module |
| + | </ref> === |
| + | |
| + | ==== 例) interface breakout slot 2 port 1-4 map 10g-4x ==== |
| + | |
| + | === Nexus 7000 / 7700 <ref>[https://community.cisco.com/t5/tkb-%E3%83%87%E3%83%BC%E3%82%BF%E3%82%BB%E3%83%B3%E3%82%BF%E3%83%BC-%E3%83%89%E3%82%AD%E3%83%A5%E3%83%A1%E3%83%B3%E3%83%88/nexus-%E3%82%B7%E3%83%AA%E3%83%BC%E3%82%BA-cvr-qsfp-sfp10g-%E3%81%AE%E5%88%A9%E7%94%A8%E6%96%B9%E6%B3%95%E3%81%AB%E3%81%A4%E3%81%84%E3%81%A6/ta-p/3689358#toc-hId-62008343 Nexus 7000/7700 シリーズ]</ref> === |
| + | |
| + | ==== 例) interface breakout slot 2 port 1-4 map 10g-4x ==== |
| | | |
| === Nexus 9300 === | | === Nexus 9300 === |
318行目: |
348行目: |
| * コマンド投入後、次回の再起動時に有効になる旨のメッセージが表示されます | | * コマンド投入後、次回の再起動時に有効になる旨のメッセージが表示されます |
| * ただ、これは起動時に発動するコマンドのため、reload が必要とは違う気がします | | * ただ、これは起動時に発動するコマンドのため、reload が必要とは違う気がします |
− |
| |
− |
| |
| == Juniper == | | == Juniper == |
| | | |