93行目: |
93行目: |
| Catalyst 4500 など一部機種ではサポートされますが、オートネゴシエーションができなかったりと制限があります。 | | Catalyst 4500 など一部機種ではサポートされますが、オートネゴシエーションができなかったりと制限があります。 |
| | | |
− | Catalyst 4500X 参考 : [https://www.cisco.com/c/en/us/td/docs/switches/lan/catalyst4500/release/note/ol-37xe-4500x.html#pgfId-2771244 New Software Features in Release IOS XE 3.7.1E] <ref>10/ 100 Mbps support for GLC-T | + | ===== Catalyst 4500X 参考 : [https://www.cisco.com/c/en/us/td/docs/switches/lan/catalyst4500/release/note/ol-37xe-4500x.html#pgfId-2771244 New Software Features in Release IOS XE 3.7.1E] <ref>10/ 100 Mbps support for GLC-T |
| | | |
| 10/ 100 Mbps support for GLC-T (1000Base-T) SFP transceiver. You can set the interface speed to 10 or 100, by using the speed interface configuration command. The default setting provides 1000 Mbps with auto-negotiation. | | 10/ 100 Mbps support for GLC-T (1000Base-T) SFP transceiver. You can set the interface speed to 10 or 100, by using the speed interface configuration command. The default setting provides 1000 Mbps with auto-negotiation. |
| | | |
− | (IP Base and Enterprise Services)</ref> | + | (IP Base and Enterprise Services)</ref> ===== |
| | | |
− | Catalyst 9600 参考 : [https://www.cisco.com/c/en/us/td/docs/switches/lan/catalyst9600/software/release/16-12/release_notes/ol-16-12-9600.html#concept_o3q_1ct_5jb Hardware Features in Cisco IOS XE Gibraltar 16.12.2] <ref>Cisco SFP Modules for Gigabit Ethernet | + | ===== Catalyst 9600 参考 : [https://www.cisco.com/c/en/us/td/docs/switches/lan/catalyst9600/software/release/16-12/release_notes/ol-16-12-9600.html#concept_o3q_1ct_5jb Hardware Features in Cisco IOS XE Gibraltar 16.12.2] <ref name=":0">Cisco SFP Modules for Gigabit Ethernet |
| | | |
− | Supported Cisco SFP Modules for Gigabit Ethernet on C9600-LC-48YL line card are: | + | Supported Cisco SFP Modules product numbers: |
| | | |
− | GLC-T (1G) | + | GLC-GE-100FX |
| | | |
− | GLC-TE (1G)</ref> | + | GLC-T (10/100 Mbps) |
| | | |
− | * SUP1 + C9600-LC-48YL は 100Mbps をサポートしない | + | GLC-TE (10/100 Mbps) |
− | * SUP2 + C9600-LC-48YL は 1G もサポートしない <ref>[https://www.cisco.com/c/en/us/products/collateral/switches/catalyst-9600-series-switches/nb-06-cat9600-ser-sup-eng-data-sheet-cte-en.html#Catalyst9600ChassisandLineCardswithC9600XSUP2 Cisco Catalyst 9600 Series Supervisor Engine Data Sheet] | + | |
| + | Note |
| + | |
| + | GLC-T and GLC-TE operating at 10/100Mbps speed are not supported with Cisco QSA Module (CVR-QSFP-SFP10G).</ref> ===== |
| + | |
| + | * GLC-T 1G は 16.12.2- からサポート |
| + | * SUP1 + IOS-XE -17.3.X までは GLC-T で 100Mbps をサポートしない |
| + | |
| + | ===== Catalyst 9600 参考 : [https://www.cisco.com/c/en/us/td/docs/switches/lan/catalyst9600/software/release/17-4/release_notes/ol-17-4-9600.html#concept_twd_rd2_3mb Hardware Features in Cisco IOS XE Bengaluru 17.4.1] <ref name=":0" /> ===== |
| + | * SUP1 + IOS-XE 17.4.1- は C9600-LC-48YL は 10/100Mbps をサポートする |
| + | * CVR-QSFP-SFP10G で QSFP に GLC-T を搭載した場合、10/100Mbps をサポートしない |
| + | * SUP2 は C9600-LC-48YL は 1G もサポートしない <ref>[https://www.cisco.com/c/en/us/products/collateral/switches/catalyst-9600-series-switches/nb-06-cat9600-ser-sup-eng-data-sheet-cte-en.html#Catalyst9600ChassisandLineCardswithC9600XSUP2 Cisco Catalyst 9600 Series Supervisor Engine Data Sheet] |
| | | |
| Table 4. Line card support for C9600X-SUP-2 | | Table 4. Line card support for C9600X-SUP-2 |
117行目: |
128行目: |
| | | |
| 48-Port 10GE/25GE/50GE<sup>1</sup> | | 48-Port 10GE/25GE/50GE<sup>1</sup> |
− |
| |
| | | |
| <sup>1</sup> C9600X-SUP-2 only supports speeds of 10GE or higher.</ref> | | <sup>1</sup> C9600X-SUP-2 only supports speeds of 10GE or higher.</ref> |
− |
| |
| | | |
| [https://tmgmatrix.cisco.com/?si=C9600-LC-48YL Cisco Optics-to-Device Compatibility Matrix] で C9600-LC-48YL を検索すると、 | | [https://tmgmatrix.cisco.com/?si=C9600-LC-48YL Cisco Optics-to-Device Compatibility Matrix] で C9600-LC-48YL を検索すると、 |