2026-09-11 Cisco StackWise Virtual まとめ
提供：hkatou_Lab
Cisco Catalyst StackWise Virtual についてまとめました。
動作しない構成で売るのは、やめてクレメンス。
| IOS-XE
最小サポート |
ライセンス#1
Network Essencials では動作しません |
ライセンス#2 | SVL/DAD
ポート番号制限 |
クアッド スーパーバイザ with RPR | 備考 | ||
|---|---|---|---|---|---|---|---|
| C3850 | WS-C3850-12XS
WS-C3850-24XS WS-C3850-48XS |
16.3.3 : 初期リリース
16.6.1 : 再導入 |
IP Base
IP Services |
- | - | 16.12 までは 3850XS でも検証可能 | |
| C9400 | C9400-SUP-1 | 16.9.1 | Network Advantage | C9400-SUP-UPG-LIC= | - | なぜか追加ライセンスが必要 | |
| C9400X-SUP-2 | 2023/08/30
未サポート |
- | - | - | まーだ実装されないんですかねぇ | ||
| C9500 | C9500-12Q, C9500-16X,
C9500-24Q, C9500-40X |
16.6.1 [1] | Network Advantage | - | -16.10.x : ネットワーク モジュールで使用不可
16.11.x- : ネットワーク モジュールも SVL/DAD に使用可能 |
- | よくみるやつ
EoS 出てるので今後のデプロイは少なくなる |
| C9500H | C9500-32C, C9500-32QC,
C9500-48Y4C, and C9500-24Y4C |
16.10.1 [2] | Network Advantage | - | 32C : 1-16 ポートのみ [3]
32QC : ネイティブ 40/100G ポートのみ [4] |
- | 今後の主流
24Y or 48Y の 100G で SVL を組むともったいないため、25G x4 or 8 ってのもあり |
| C9500X | C9500X-28C8D | 17.10.1 [5] | Network Advantage | - | - | - | Silicon One ASIC 搭載機
17.12.x の安定版からちゃんと動くか ? |
| C9500X-60L4D | 17.10.1b [6] | Network Advantage | - | - | - | Silicon One ASIC 搭載機
17.12.x の安定版からちゃんと動くか ? | |
| C9600 | C9600-SUP-1 | 16.12.1 | Network Advantage | - | - | 17.2.X以降 | DAD はラインカード型式に制限あり [7] |
| C9600X | C9600X-SUP-2 | 17.10.1 [8] | Network Advantage | - | - | 2023/08/30
未サポート [9] |
未実装 |
リンク
引用
- ↑ Feature History for Cisco StackWise Virtual Cisco IOS XE Everest 16.6.1 Cisco StackWise Virtual Support for this feature was introduced only on the C9500-12Q, C9500-16X, C9500-24Q, C9500-40X models of the Cisco Catalyst 9500 Series Switches.
- ↑ Feature History for Cisco StackWise Virtual Cisco IOS XE Gibraltar 16.10.1 Cisco StackWise Virtual Support for this feature was introduced on the C9500-32C, C9500-32QC, C9500-48Y4C, and C9500-24Y4C models of the Cisco Catalyst 9500 Series Switches.
- ↑ Restrictions for Cisco Catalyst 9500 Series High Performance Switches On C9500-32C switches, you can configure SVL and DAD only on interfaces numbered 1-16 on the front panel of the switch.
- ↑ Restrictions for Cisco Catalyst 9500 Series High Performance Switches On C9500-32QC, you can configure SVL and DAD only on native 100G and 40G interfaces (default configuration ports). You cannot configure SVL and DAD on converted 100G and 40G interfaces.
- ↑ Feature History for Cisco StackWise Virtual Cisco IOS XE Dublin 17.10.1 Cisco StackWise Virtual Support for this feature was introduced on the C9500X-28C8D model of Cisco Catalyst 9500 Series Switches.
- ↑ Feature History for Cisco StackWise Virtual Cisco IOS XE Dublin 17.10.1b Cisco StackWise Virtual Support for this feature was introduced on the C9500X-60L4D model of Cisco Catalyst 9500 Series Switches.
- ↑ Feature History for Cisco StackWise Virtual Cisco IOS XE Amsterdam 17.2.1 Cisco StackWise Virtual: Interface and line card configurations DAD links are now supported for the following interface and line card configurations: 1G interface on a C9600-LC-48TX line card. 1G interface if configured between a C9600-LC-48TX line card and either a C9600-LC-48YL line card or a C9600-LC-24C line card. 1G interface and 10G interface if configured between two C9600-LC-48YL line cards or between two C9600-LC-24C line cards. 1G interface and 10G interface if configured between a C9600-LC-48YL line card and a C9600-LC-24C line card.
- ↑ Feature History for Cisco StackWise Virtual Cisco IOS XE Dublin 17.10.1 Cisco StackWise Virtual Support for this feature was introduced on the Cisco Catalyst 9600 Series Supervisor 2 Module (C9600X-SUP-2).
- ↑ Restrictions for Cisco StackWise Virtual The following are the restrictions for Cisco Catalyst 9600 Series Supervisor 2 Module (C9600X-SUP-2): ・C9600X-SUP-2 on a C9606R chassis does not support Quad-Supervisor with RPR.
