「2024-11-28 Cat9000V GIR 機能検証」の版間の差分

新しい編集 →

ビジュアルウィキテキスト

2024年11月3日 (日) 12:05時点における版

Nexus で採用され Catalyst 9000 から実装された GIR について、機能検証を実施しました。

このページにラボシナリオとして、コンフィグや確認コマンド、疎通確認のポイントなどをまとめています。

検証対象として Catalyst 9000V Q200 を使用していますが、実機の Catalyst 9000 シリーズでも同様の動作をするはずです。

目的

GIR の動作について理解を深められること。

通信要件

GIR : BGP / OSPF / HSRP

GIR を開始したホストを経路迂回すること
GIR を停止したホストに経路復旧すること

検証環境

Cisco Catalyst 9000V Q200 : IOS-XE 17.12.1 x6

構成図

Catalyst 3850 : PE01 , CE01 , CE02 , CORE01 , CORE02 , CPE01

PE01 を WAN の機器、CE01 , CE02 , CORE01 , CORE02 , CPE を LAN の機器とする。

IP アドレッシング

文書用例示アドレス (8.8.8.8 を除く)
大種別	小種別	ネットワークアドレス	ホスト	インターフェース	ホストアドレス	備考
グローバルアドレス	WAN グローバルアドレス	203.0.113.128/30	PE01	Gi1/0/1	203.0.113.129/30	BGP でデフォルトルートを広報
		203.0.113.128/30	CE01	Gi1/0/23	203.0.113.130/30	PE ルータからデフォルトルートを受信
		203.0.113.132/30	PE01	Gi1/0/1	203.0.113.133/30	BGP でデフォルトルートを広報
		203.0.113.132/30	CE02	Gi1/0/23	203.0.113.134/30	PE ルータからデフォルトルートを受信
		198.51.100.0/24	PE01	Lo0	198.51.100.1/32	上り方向 ping の宛先
	LAN グローバルアドレス		CE01	Lo0	198.51.100.11/32	iBGP ピア用
			CE02	Lo0	198.51.100.12/32	iBGP ピア用
			CORE01	Lo0	198.51.100.21/32
			CORE02	Lo0	198.51.100.22/32
		203.0.113.128/25	CE01	Po21	203.0.113.137/30	CE01 <-> CE02 間わたり OSPF P2P リンク迂回経路用
			CE02	Po21	203.0.113.138/30	CE01 <-> CE02 間わたり OSPF P2P リンク迂回経路用
			CE01	Gi1/0/1	203.0.113.141/30	CE01 <-> CORE01 間 OSPF P2P リンク
			CORE01	Gi1/0/23	203.0.113.142/30	CE01 <-> CORE01 間 OSPF P2P リンク

			CE02	Gi1/0/2	203.0.113.145/30	CE02 <-> CORE02 間 OSPF P2P リンク
			CORE02	Gi1/0/24	203.0.113.146/30	CE02 <-> CORE02 間 OSPF P2P リンク
			CE01	Po21	203.0.113.149/30	CORE01 <-> CORE02 間 OSPF P2P リンク迂回経路用
			CE02	Po21	203.0.113.150/30	CORE01 <-> CORE02 間 OSPF P2P リンク迂回経路用
		203.0.113.0/25	CE01	Vlan1	203.0.113.2/25 HSRP .1	CPE 収容 SVI
			CE02	Vlan1	203.0.113.3/25 HSRP .1	CPE 収容 SVI
			CPE	Vlan1	203.0.113.101/25	CPE01 用ホストアドレス

プライベートアドレス	LAN プライベートアドレス	なし

コンフィギュレーション

ここではプロトコル・ホスト別にコンフィギュレーションを簡単に解説します。

自分でコンフィグを組んでみたい人向けに、デフォルトでは表示しません。

PE01

PE01 コンフィグ

プロトコル

PE01 コンフィグ

解説

eBGP

PE01#show run | s back0|net1/0/[1-2]$|router bgp|ip route 0

interface Loopback0
 ip address 198.51.100.1 255.255.255.255

interface GigabitEthernet1/0/1
 description CE01_Gi1/0/23
 no switchport
 ip address 203.0.113.129 255.255.255.252

interface GigabitEthernet1/0/2
 description CE02_Gi1/0/23
 no switchport
 ip address 203.0.113.133 255.255.255.252

router bgp 64496
 bgp router-id 198.51.100.1
 bgp log-neighbor-changes
 bgp deterministic-med
 timers bgp 10 30
 neighbor 203.0.113.130 remote-as 64512
 neighbor 203.0.113.130 description CE01
 neighbor 203.0.113.130 default-originate
 neighbor 203.0.113.130 soft-reconfiguration inbound
 neighbor 203.0.113.134 remote-as 64512
 neighbor 203.0.113.134 description CE02
 neighbor 203.0.113.134 default-originate
 neighbor 203.0.113.134 soft-reconfiguration inbound

ip route 0.0.0.0 0.0.0.0 Null0 254

CE01 , 02 と eBGP ピアを張るための設定

CE01 , 02

CE01 , 02 コンフィグ

プロトコル

CE01 コンフィグ

CE02 コンフィグ

解説

eBGP

CE01#show run | s back0|net1/0/23$|^router bgp|route-map

interface Loopback0
 ip address 198.51.100.11 255.255.255.255

interface GigabitEthernet1/0/23
 description PE01_Gi1/0/1
 no switchport
 ip address 203.0.113.130 255.255.255.252

router bgp 64512
 bgp router-id 198.51.100.11
 bgp log-neighbor-changes
 bgp deterministic-med
 network 203.0.113.0 mask 255.255.255.128
 timers bgp 10 30
 neighbor 198.51.100.12 remote-as 64512
 neighbor 198.51.100.12 description CE02
 neighbor 198.51.100.12 update-source Loopback0
 neighbor 198.51.100.12 next-hop-self
 neighbor 198.51.100.12 soft-reconfiguration inbound
 neighbor 203.0.113.129 remote-as 64496
 neighbor 203.0.113.129 description PE01
 neighbor 203.0.113.129 soft-reconfiguration inbound
 neighbor 203.0.113.129 route-map LP300 in
 neighbor 203.0.113.129 route-map MED100 out

route-map LP300 permit 10
 set local-preference 300

route-map MED100 permit 10
 set metric 100

CE02#show run | s back0|net1/0/23$|^router bgp|route-map

interface Loopback0
 ip address 198.51.100.12 255.255.255.255

interface GigabitEthernet1/0/23
 description PE01_Gi1/0/2
 no switchport
 ip address 203.0.113.134 255.255.255.252

router bgp 64512
 bgp router-id 198.51.100.12
 bgp log-neighbor-changes
 bgp deterministic-med
 network 203.0.113.0 mask 255.255.255.128
 timers bgp 10 30
 neighbor 198.51.100.11 remote-as 64512
 neighbor 198.51.100.11 description CE01
 neighbor 198.51.100.11 update-source Loopback0
 neighbor 198.51.100.11 next-hop-self
 neighbor 198.51.100.11 soft-reconfiguration inbound
 neighbor 203.0.113.133 remote-as 64496
 neighbor 203.0.113.133 description PE01
 neighbor 203.0.113.133 soft-reconfiguration inbound
 neighbor 203.0.113.133 route-map LP100 in
 neighbor 203.0.113.133 route-map MED300 out

route-map MED300 permit 10
 set metric 300

route-map LP100 permit 10
 set local-preference 100

PE01 と eBGP ピア、

CE01 と CE02 で iBGP ピアを張るコンフィグ route-map LP300 LP300 で上りトラフィックを優先する値が高いほうが優先 route-map MED100 MED100 で下りトラフィックを優先する値が低いほうが優先

OSPF

CE01#show run | s net1/0/1$|net1/0/2[1-2]$|el21|^router ospf

interface Port-channel21
 description CE02_Po21
 no switchport
 ip address 203.0.113.137 255.255.255.252
 ip ospf network point-to-point
 ip ospf cost 100

interface GigabitEthernet1/0/1
 description CORE01_Gi1/0/23
 no switchport
 ip address 203.0.113.141 255.255.255.252
 ip ospf network point-to-point
 ip ospf cost 1

interface GigabitEthernet1/0/21
 description CE02_Gi1/0/21
 no switchport
 no ip address
 channel-group 21 mode active

interface GigabitEthernet1/0/22
 description CE02_Gi1/0/22
 no switchport
 no ip address
 channel-group 21 mode active

router ospf 1
 router-id 198.51.100.11
 passive-interface default
 no passive-interface GigabitEthernet1/0/1
 no passive-interface Port-channel21
 network 198.51.100.11 0.0.0.0 area 0.0.0.0
 network 203.0.113.136 0.0.0.3 area 0.0.0.0
 network 203.0.113.140 0.0.0.3 area 0.0.0.0
 default-information originate metric 1 metric-type 1

CE02#show run | s net1/0/2$|net1/0/2[1-2]$|el21|^router ospf

interface Port-channel21
 description CE01_Po21
 no switchport
 ip address 203.0.113.138 255.255.255.252
 ip ospf network point-to-point
 ip ospf cost 100

interface GigabitEthernet1/0/2
 description CORE02_Gi1/0/24
 no switchport
 ip address 203.0.113.145 255.255.255.252
 ip ospf network point-to-point
 ip ospf cost 40

interface GigabitEthernet1/0/21
 description CE01_Gi1/0/21
 no switchport
 no ip address
 channel-group 21 mode active

interface GigabitEthernet1/0/22
 description CE01_Gi1/0/22
 no switchport
 no ip address
 channel-group 21 mode active

router ospf 1
 router-id 198.51.100.12
 passive-interface default
 no passive-interface GigabitEthernet1/0/2
 no passive-interface Port-channel21
 network 198.51.100.12 0.0.0.0 area 0.0.0.0
 network 203.0.113.144 0.0.0.3 area 0.0.0.0
 network 203.0.113.128 0.0.0.127 area 0.0.0.0
 default-information originate metric 100 metric-type 1

CE01 , 02 間

CE01 , 02 <-> CORE01 , 02 間 OSPF iBGP で使用する Loopback を広報する

GIR

CE01#show run | s mainte
maintenance-template BGP_OSPF
 router bgp 64512
 router ospf 1
system mode maintenance
 timeout 15
 template BGP_OSPF
 failsafe 5

CE02#show run | s mainte
maintenance-template BGP_OSPF
 router bgp 64512
 router ospf 1
system mode maintenance
 timeout 15
 template BGP_OSPF
 failsafe 5

CORE01 , 02 コンフィグ

種別

CORE01 コンフィグ

CORE02 コンフィグ

解説

OSPF

CORE01#show run | s net1/0/2[1-2]$|el21|^router ospf

interface Port-channel21
 description CORE02_Po21
 no switchport
 ip address 203.0.113.149 255.255.255.252
 ip ospf network point-to-point
 ip ospf cost 50

interface GigabitEthernet1/0/21
 description CORE02_Gi1/0/21
 no switchport
 no ip address
 channel-group 21 mode active

interface GigabitEthernet1/0/22
 description CORE02_Gi1/0/22
 no switchport
 no ip address
 channel-group 21 mode active

router ospf 1
 router-id 198.51.100.21
 passive-interface default
 no passive-interface GigabitEthernet1/0/23
 no passive-interface Port-channel21
 network 198.51.100.21 0.0.0.0 area 0.0.0.0
 network 203.0.113.0 0.0.0.127 area 0.0.0.0
 network 203.0.113.140 0.0.0.3 area 0.0.0.0
 network 203.0.113.148 0.0.0.3 area 0.0.0.0

CORE02#show run | s net1/0/2[1-2]$|el21|^router ospf

interface Port-channel21
 description CORE01_Po21
 no switchport
 ip address 203.0.113.150 255.255.255.252
 ip ospf network point-to-point
 ip ospf cost 50

interface GigabitEthernet1/0/21
 description CORE01_GI1/0/21
 no switchport
 no ip address
 channel-group 21 mode active

interface GigabitEthernet1/0/22
 description CORE01_GI1/0/22
 no switchport
 no ip address
 channel-group 21 mode active

router ospf 1
 router-id 198.51.100.22
 passive-interface default
 no passive-interface GigabitEthernet1/0/24
 no passive-interface Port-channel21
 network 198.51.100.22 0.0.0.0 area 0.0.0.0
 network 203.0.113.0 0.0.0.127 area 0.0.0.0
 network 203.0.113.144 0.0.0.3 area 0.0.0.0
 network 203.0.113.148 0.0.0.3 area 0.0.0.0

HSRP

CORE01#show run | s net1/0/1$|Vlan1$
interface GigabitEthernet1/0/1
 description CPE01_Gi1/0/23
 switchport mode access
 switchport nonegotiate
 spanning-tree portfast
 spanning-tree bpdufilter enable

interface Vlan1
 ip address 203.0.113.2 255.255.255.128
 standby version 2
 standby 1 ip 203.0.113.1
 standby 1 priority 110
 standby 1 preempt

CORE02#show run | s net1/0/1$|Vlan1$
interface GigabitEthernet1/0/1
 description CPE01_Gi1/0/24
 switchport mode access
 switchport nonegotiate
 spanning-tree portfast
 spanning-tree bpdufilter enable

interface Vlan1
 ip address 203.0.113.3 255.255.255.128
 standby version 2
 standby 1 ip 203.0.113.1
 standby 1 priority 105
 standby 1 preempt

GIR

CORE01#show run | s mainte
maintenance-template OSPF_HSRP
 router ospf 1
 hsrp Vlan1 1

system mode maintenance
 timeout 15
 template OSPF_HSRP
 failsafe 5

CORE02#show run | s mainte
maintenance-template OSPF_HSRP
 router ospf 1
 hsrp Vlan1 1

system mode maintenance
 timeout 15
 template OSPF_HSRP
 failsafe 5

CPE01 コンフィグ

種別

CPE01 コンフィグ

解説

ホスト

CPE01#show run | s net1/0/2[3-4]|Vlan1|ip route 0

interface GigabitEthernet1/0/23
 description CORE01_Gi1/0/1
 switchport mode access
 switchport nonegotiate
 spanning-tree portfast
 spanning-tree bpdufilter enable

interface GigabitEthernet1/0/24
 description CORE02_Gi1/0/1
 switchport mode access
 switchport nonegotiate
 spanning-tree portfast
 spanning-tree bpdufilter enable

interface Vlan1
 ip address 203.0.113.101 255.255.255.128

ip route 0.0.0.0 0.0.0.0 203.0.113.1

疎通・経路確認

コマンドリスト

PE01

PE01#ping 203.0.113.101
Type escape sequence to abort.
Sending 5, 100-byte ICMP Echos to 203.0.113.101, timeout is 2 seconds:
!!!!!
Success rate is 100 percent (5/5), round-trip min/avg/max = 70/87/103 ms
PE01#
PE01#traceroute 203.0.113.101
Type escape sequence to abort.
Tracing the route to 203.0.113.101
VRF info: (vrf in name/id, vrf out name/id)
  1 203.0.113.130 40 msec 40 msec 38 msec
  2 203.0.113.142 81 msec 54 msec 61 msec
  3 203.0.113.101 [AS 64512] 103 msec *  105 msec

通常時は CE01 -> CORE01 -> CPE01 を経由します。

PE01#show ip bgp
BGP table version is 11, local router ID is 198.51.100.1
Status codes: s suppressed, d damped, h history, * valid, > best, i - internal,
              r RIB-failure, S Stale, m multipath, b backup-path, f RT-Filter,
              x best-external, a additional-path, c RIB-compressed,
              t secondary path, L long-lived-stale,
Origin codes: i - IGP, e - EGP, ? - incomplete
RPKI validation codes: V valid, I invalid, N Not found

     Network          Next Hop            Metric LocPrf Weight Path
      0.0.0.0          0.0.0.0                                0 i
 *>   203.0.113.0/25   203.0.113.130          100             0 64512 i
 *                     203.0.113.134          300             0 64512 i

CE01 宛を優先させています。

CORE01

CORE01#show ip route 0.0.0.0
Routing entry for 0.0.0.0/0, supernet
  Known via "ospf 1", distance 110, metric 2, candidate default path
  Tag 1, type extern 1
  Last update from 203.0.113.141 on GigabitEthernet1/0/23, 00:01:20 ago
  Routing Descriptor Blocks:
  * 203.0.113.141, from 198.51.100.11, 00:01:20 ago, via GigabitEthernet1/0/23
      Route metric is 2, traffic share count is 1
      Route tag 1
CORE01#
CORE01#show standby brief
                     P indicates configured to preempt.
                     |
Interface   Grp  Pri P State   Active          Standby         Virtual IP
Vl1         1    110 P Active  local           203.0.113.3     203.0.113.1

OSPF メトリック 1 と HSRP Priority 110 で優先させています。

CPE01

CPE01#ping 198.51.100.1
Type escape sequence to abort.
Sending 5, 100-byte ICMP Echos to 198.51.100.1, timeout is 2 seconds:
!!!!!
Success rate is 100 percent (5/5), round-trip min/avg/max = 77/87/109 ms
CPE01#
CPE01#traceroute 198.51.100.1
Type escape sequence to abort.
Tracing the route to 198.51.100.1
VRF info: (vrf in name/id, vrf out name/id)
  1 203.0.113.2 40 msec 41 msec 72 msec
  2 203.0.113.141 63 msec 66 msec 69 msec
  3 203.0.113.129 89 msec *  84 msec

通常時は CORE01 -> CE01 -> PE01 を経由します。

CE01 GIR BGP + OSPF 動作確認

start maintenance でホストを Remove します。

CE01#start maintenance
Template BGP_OSPF will be applied. Do you want to continue?[confirm]
CE01#
Nov  3 2024 00:43:52 UTC: %MMODE-6-MMODE_SNAPSHOT_CREATE_ENTER_MMODE: Generating current snapshot 'before_maintenance'
Nov  3 2024 00:43:52 UTC: %MMODE-6-MMODE_CLIENT_TRANSITION_START: Maintenance Isolate start for router bgp 64512
Nov  3 2024 00:44:23 UTC: %MMODE-6-MMODE_CLIENT_TRANSITION_COMPLETE: Maintenance Isolate complete for router bgp 64512
Nov  3 2024 00:44:23 UTC: %MMODE-6-MMODE_CLIENT_TRANSITION_START: Maintenance Isolate start for router ospf 1
Nov  3 2024 00:44:53 UTC: %MMODE-6-MMODE_CLIENT_TRANSITION_COMPLETE: Maintenance Isolate complete for router ospf 1
Nov  3 2024 00:44:53 UTC: %MMODE-6-MMODE_ISOLATED: System is in Maintenance

CE01 BGP + OSPF GIR 動作確認
確認	通常時	CE01 メンテナンス時	備考
BGP	PE01#traceroute 203.0.113.101 Type escape sequence to abort. Tracing the route to 203.0.113.101 VRF info: (vrf in name/id, vrf out name/id) 1 203.0.113.130 39 msec 65 msec 37 msec 2 203.0.113.142 66 msec 75 msec 67 msec 3 203.0.113.101 [AS 64512] 94 msec * 94 msec PE01#show ip bgp BGP table version is 13, local router ID is 198.51.100.1 Status codes: s suppressed, d damped, h history, * valid, > best, i - internal, r RIB-failure, S Stale, m multipath, b backup-path, f RT-Filter, x best-external, a additional-path, c RIB-compressed, t secondary path, L long-lived-stale, Origin codes: i - IGP, e - EGP, ? - incomplete RPKI validation codes: V valid, I invalid, N Not found Network Next Hop Metric LocPrf Weight Path 0.0.0.0 0.0.0.0 0 i > 203.0.113.0/25 203.0.113.130 100 0 64512 i 203.0.113.134 300 0 64512 i	PE01#traceroute 203.0.113.101 Type escape sequence to abort. Tracing the route to 203.0.113.101 VRF info: (vrf in name/id, vrf out name/id) 1 203.0.113.134 50 msec 30 msec 35 msec 2 203.0.113.146 57 msec 67 msec 67 msec 3 203.0.113.101 [AS 64512] 125 msec * 135 msec PE01# PE01#show ip bgp BGP table version is 8, local router ID is 198.51.100.1 Status codes: s suppressed, d damped, h history, * valid, > best, i - internal, r RIB-failure, S Stale, m multipath, b backup-path, f RT-Filter, x best-external, a additional-path, c RIB-compressed, t secondary path, L long-lived-stale, Origin codes: i - IGP, e - EGP, ? - incomplete RPKI validation codes: V valid, I invalid, N Not found Network Next Hop Metric LocPrf Weight Path 0.0.0.0 0.0.0.0 0 i *> 203.0.113.0/25 203.0.113.134 300 0 64512 i	上り : CPE01 CORE01 はわたりを経由するように変更されています。下り : PE01 PE01 は CE02 を経由するように変更されています。 CE01 は BGP アドレス広報を停止していました。
		CE01(maint-mode)#show ip bgp summary BGP router identifier 198.51.100.11, local AS number 64512 BGP table version is 20, main routing table version 20 2 network entries using 496 bytes of memory 5 path entries using 680 bytes of memory 5/2 BGP path/bestpath attribute entries using 1480 bytes of memory 1 BGP AS-PATH entries using 24 bytes of memory 0 BGP route-map cache entries using 0 bytes of memory 0 BGP filter-list cache entries using 0 bytes of memory BGP using 2680 total bytes of memory 1 received paths for inbound soft reconfiguration BGP activity 5/3 prefixes, 22/17 paths, scan interval 60 secs 2 networks peaked at 08:12:51 Nov 3 2024 JST (03:45:55.560 ago) Neighbor V AS MsgRcvd MsgSent TblVer InQ OutQ Up/Down State/PfxRcd 198.51.100.12 4 64512 153 160 20 0 0 00:22:50 2 203.0.113.129 4 64496 155 159 20 0 0 00:23:14 1 CE01(maint-mode)#show ip bgp BGP table version is 20, local router ID is 198.51.100.11 Status codes: s suppressed, d damped, h history, * valid, > best, i - internal, r RIB-failure, S Stale, m multipath, b backup-path, f RT-Filter, x best-external, a additional-path, c RIB-compressed, t secondary path, L long-lived-stale, Origin codes: i - IGP, e - EGP, ? - incomplete RPKI validation codes: V valid, I invalid, N Not found Network Next Hop Metric LocPrf Weight Path * i 0.0.0.0 198.51.100.12 0 100 0 64496 i > 203.0.113.129 300 0 64496 i i 203.0.113.0/25 198.51.100.12 41 100 0 i *> 203.0.113.142 65536 32768 i
OSPF	CE02#show ip route 0.0.0.0 Routing entry for 0.0.0.0/0, supernet Known via "ospf 1", distance 110, metric 81, candidate default path Tag 1, type extern 1 Last update from 203.0.113.137 on Port-channel21, 00:00:20 ago Routing Descriptor Blocks: * 203.0.113.137, from 198.51.100.11, 00:00:20 ago, via Port-channel21 Route metric is 81, traffic share count is 1 Route tag 1	CE02#show ip route 0.0.0.0 Routing entry for 0.0.0.0/0, supernet Known via "bgp 64512", distance 20, metric 0, candidate default path Tag 64496, type external Last update from 203.0.113.133 00:00:07 ago Routing Descriptor Blocks: * 203.0.113.133, from 203.0.113.133, 00:00:07 ago opaque_ptr 0x7477AABBBCC0 Route metric is 0, traffic share count is 1 AS Hops 1 Route tag 64496 MPLS label: none	上り : CE02 通常時は CE01 宛わたり Po21 を向いていますが、CE01 GIR 中は PE01 宛 Gi1/0/23 を向いています。
	CORE01#show ip route 0.0.0.0 Routing entry for 0.0.0.0/0, supernet Known via "ospf 1", distance 110, metric 2, candidate default path Tag 1, type extern 1 Last update from 203.0.113.141 on GigabitEthernet1/0/23, 00:07:11 ago Routing Descriptor Blocks: * 203.0.113.141, from 198.51.100.11, 00:07:11 ago, via GigabitEthernet1/0/23 Route metric is 2, traffic share count is 1 Route tag 1 CORE01#show ip ospf 1 rib OSPF Router with ID (198.51.100.21) (Process ID 1) Base Topology (MTID 0) OSPF local RIB Codes: * - Best, > - Installed in global RIB > 198.51.100.11/32, Intra, cost 65536, area 0.0.0.0 via 203.0.113.141, GigabitEthernet1/0/23 > 198.51.100.12/32, Intra, cost 91, area 0.0.0.0 via 203.0.113.150, Port-channel21 <snip> CORE01#ping 198.51.100.11 Type escape sequence to abort. Sending 5, 100-byte ICMP Echos to 198.51.100.11, timeout is 2 seconds: !!!!! Success rate is 100 percent (5/5), round-trip min/avg/max = 19/25/35 ms	CORE01#show ip route 0.0.0.0 Routing entry for 0.0.0.0/0, supernet Known via "ospf 1", distance 110, metric 190, candidate default path Tag 1, type extern 1 Last update from 203.0.113.150 on Port-channel21, 00:00:06 ago Routing Descriptor Blocks: * 203.0.113.150, from 198.51.100.12, 00:00:06 ago, via Port-channel21 Route metric is 190, traffic share count is 1 Route tag 1	上り : CORE01 CE01 の OSPF コストメトリックが 65536 になっており、重くなっています。疎通自体は可能です。
	CPE01#traceroute 198.51.100.1 Type escape sequence to abort. Tracing the route to 198.51.100.1 VRF info: (vrf in name/id, vrf out name/id) 1 203.0.113.2 71 msec 73 msec 65 msec 2 203.0.113.141 82 msec 53 msec 55 msec 3 203.0.113.129 66 msec * 80 msec	CPE01#traceroute 198.51.100.1 Type escape sequence to abort. Tracing the route to 198.51.100.1 VRF info: (vrf in name/id, vrf out name/id) 1 203.0.113.2 37 msec 69 msec 38 msec 2 203.0.113.150 93 msec 86 msec 88 msec 3 203.0.113.145 109 msec 110 msec 111 msec 4 203.0.113.133 213 msec * 154 msec	上り : CPE01 CORE01 のわたりを経由するようになりました。

動作確認 - ホスト別コマンドリスト

リファレンス

脚注

「2024-11-28 Cat9000V GIR 機能検証」の版間の差分

2024年11月3日 (日) 12:05時点における版

目次

目的

通信要件

GIR : BGP / OSPF / HSRP

検証環境

構成図

IP アドレッシング

コンフィギュレーション

PE01

CE01 , 02

疎通・経路確認

コマンドリスト

PE01

CORE01

CPE01

CE01 GIR BGP + OSPF 動作確認

動作確認 - ホスト別コマンドリスト

リファレンス

脚注

案内メニュー

「2024-11-28 Cat9000V GIR 機能検証」の版間の差分

2024年11月3日 (日) 12:05時点における版

目的

通信要件

GIR : BGP / OSPF / HSRP

検証環境

構成図

IP アドレッシング

コンフィギュレーション

PE01

CE01 , 02

疎通・経路確認

コマンドリスト

PE01

CORE01

CPE01

CE01 GIR BGP + OSPF 動作確認

動作確認 - ホスト別コマンドリスト

リファレンス

脚注

案内メニュー

検索